Try adding the cheatcode nodma. So you start with
knoppix 2 vga=normal nodma
Any good?
Fergus
Please help.
How can I start step by step?
Knoppix 5.1 dont't starts.
By testing I found that the release with Kernel 2.6 didn't start and 2.4 works well.
So I downloaded Knippix 3.6 Version for testing from one CD.
There you can select between starting with kernel 2.4 and 2.6.
I use the option: 2 vga=normal
When I use the Version 2.6
I get the message:
loading linux ...........
loading minirt.gz...... (minirt26.gz)
Ready.
The cursor is flashing the message stays on the screen (with the option: 2 vga=normal)
and nothing more - the keyboard buffer is getting an overflow if I use the keyboart (beeping).
I have tried many different cheat codes.
I wonder whats with the screen, because the isolinux for starting makes screen outputs.
Even in the expert-mode there is no detailed output after the message.
Does anyone now the folloow up of the start process. Is the first what happens - changing
the screen output function (form text to graphic???) that there is not one information
about the next successfull step?
Is there any possibillity to test the start-procedure without screen - beeps for every step -
or output per serial output???
Thanks in advance.
monika
alias the_idealist100
Try adding the cheatcode nodma. So you start with
knoppix 2 vga=normal nodma
Any good?
Fergus
Hallo Fergue,
to Fergue:
thank you for your help - please excuse the in German written replay - it was late
and Iwas very tiered I think.
to all:
the problem is not still in question, because the laptop is defect. With my new
desktop I use knoppix 5.3.1.
Please excuse the in German written replay - it was late and Iwas very tiered I think.
--- Because the problem is never relevant to me, I will not translate all the text. - - -
erst mal danke für den Hilfsversuch. Melde mich so spät, weil ich vorher nicht dazu
gekommen bin, mich um das Thema zu kümmern.
Leider hilft auch das nicht. Hatte am Donnerstag in einem gentoo UsertreffeOriginally Posted by fergus
den Hinweis bekommen, verschiedene cheatcodes zu testen - so ist bereits die
folgende Kombination getestet.
vga=normal noapic nolapic acpi=off apm=off noagp noapm nodma nomce nofirewire nopcmcia noscsi noswap nousb nosmp noaudio pci=biosirq
Mein Problem ist u.a., dass ich kein DSL habe und mir so nicht einmal die DVD
mit Source-Code herunterladen kann.
Auch habe ich ja schon mit fb1024x768 und anderen die Darstellung
beeinflussenden Optionen gearbeitet.
Die einzige möglichkeit die ich sehen würde, wäre ein theoretisches Debuggen
(real geht nicht, da der Bildschirm ja nichts anzeigt oder Knoppix nicht startet)
der ersten Vorgänge beim und nach dem Start, in der Hoffnung den Unterschied
zu finden. Dann könnte man ja eventuell Häppchenweise auf die neue Release
umstellen. Dazu braucht man jedoch abgesehen von dem Aufwand an Zeit noch
einen Zweiten Rechner, von dem aus man immer wieder eine geänderte Zwischen-
version erzeugen könnte.
Nun ja zu dem Thema mache ich mal ein neues Thread auf.
Nochmals Danke!
Gruß
The_idealist100
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD
$249.99
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
Microsel Server Tower Supermicro X10SAE E3-1275 V3 @3.5GHz 16GB 509849-001
$149.99
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
Supermicro 505-2 Mini-1U Server 5018A-FTN4 16GB 2.4ghz Atom + Rack Ears
$199.00
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00
1U 20" Short Depth Server Firewall PFSense X11SSH-F Xeon 3.5Ghz 32GB RAM NVME
$247.00