Hi,
I am willing to install knoppix on hard disk, booting the machine from a USB drive in the first place. I could take an .iso knoppix file, put it on the USB drive, boot from that, run knoppix-installer and have everything neatly installed on /dev/hda1. The system won't boot by itself, though, so I use grub to force a linux loader onto the hard disk's mbr. I configure it to boot on the /boot kernel image and initrd that have been put there (on the hard disk).
Now, problems start on reboot, as the system gets confused over its filesystem. I typically hit a "mount: fs type devfs not supported by kernel; umount devfs not mounted; pivot_root: no such file or directory".
Is there a reason why substituting an USB drive for a CD would drive me to all this mess?
If that should be important, let me add that I use the clusterKNOPPIX_V3.6-2004-08-16-EN-cl1.iso iso file, as my goal is to install clusterknoppix on diskless nodes (but with a USB entry on which I can boot).
Any help greatly appreciated.
Best,
Fabrice.
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
Dell PowerEdge R7525 Server 24X2.5(8XNVME)+H745 2xEPYC 7302 CPU 128G RAM 2x2400W
$3350.00
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HYVE ZEUS V1 1U BAREBONE SERVER 2X10CORE E5-2680V2 2.8GHz 16GB RAM RISER NO RAIL
$180.00
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
PowerEdge R710 Rackmount Server 80GB RAM 2x XEON E5520 CPU 4.75TB
$200.00