Hi its me again!
I made the 2.6.23 Kernel working with the HD Installation. Trying out to make an ISO out if it.
nevertheless I would be happy about some hints
Hi!
I am new to this forum, and I hope somebody could help me out a little bit.
I am trying do implement a 2.6.23 Kernel, but during boot, it is kicking me to the minimal knoppix shell with the error "Can't find KNOPPIX filesystem"
I did following to implement the new Kernel.
Got the kernel sources with "apt-get install linux-sources-2.6.23"
# make oldconfig
# enabled "High Resolution Timers, Set the Timer clock from 250 to 1000 Hz, enabled Preemtive behaviour, enabled Block Devices -> low usb ..."
# built kernel with make-kpkg kernel_image
# installed kernel with "dpkg -i linux-kernel......deb"
# got the newest cloop sources for 2.6.23, compiled them against kernel with "make-kpkg modules_image"
# installed cloop via "dpkg -i cloop ...deb"
# got the newest aufs source via CVS, compiled it.
# copied kernel, System.map, to /boot/ and /KNOPPIX/boot/isolinux/ linked everything.
# copied the new modules to /KNOPPIX/modules and to the minirt.gz.
# made an ISO, used qemu -cdrom "....iso" -no-kqemu to test the image
the first time it printed an error of Read-Only filesystem while the linuxrc script tried to use /KNOPPIX/bin/ln, to do something to the Filesystem
then i changed the linuxrc script to mount everything with "rw" permission.
the error disappeared, but i kicked me to the minimal shell again.
Now i don't know what i could do next. Maybe somebody got to the same situation and could help me out a little bit.
Thanks in advance
Markus
Hi its me again!
I made the 2.6.23 Kernel working with the HD Installation. Trying out to make an ISO out if it.
nevertheless I would be happy about some hints
I've also failed at including a new kernel in a remastered image. I can remaster 5.11 using 2.6.19 but not a new kernel.
In your remaster, you will have a master and source directory and also a master boot directory.
It is the file isolinux.cfg that points to the linux image (kernel) for booting.
The problem is that if you make a ramdisk for your kernel in getting it to load. I expanded minirt.tar.gz
but it doesnt contain the initrd.
Maybe someone else can help.
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Dell R630 8SFF 2.4Ghz 12-Core 128GB H330 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$430.04
Dell R630 8SFF 2.4Ghz 20-Core 128GB H730 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$455.04
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
NEW LSI MEGARAID SAS 9361-8i 12GB/s SAS + SATA RAID CONTROLLER CARD PCIe x8 3.0
$99.00
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 04Y5H1 High Profile
$17.99