Oh, and I extracted the contents of the Knoppix CD (including the 700MB "KNOPPIX" file) to the shared folder noted above (\\192.168.0.5\knoppix), in case anyone's wondering.
Hi everyone,
I'm trying to setup Knoppix on my LAN so that if needed I can PXE boot into a graphical recovery/test/forensics environment. We are a purely Microsoft shop so we use Windows 2003 RIS (Remote Installation Services). I have Knoppix to the point now where it boots from RIS/PXE but can't find the file needed to load the desktop environment. (see screenshot below)
The share is on a Windows 2003 server shared out using native Windows file sharing. I can browse to this share using a workstation not joined to the domain and I am not prompted for credentials so I know anonymous access to that share is working. Here is a copy of my pxelinux.cfg/default file on the RIS server:
default knoppix
prompt 0
timeout 30
LABEL knoppix
KERNEL linux
APPEND secure nfsdir=//192.168.0.5/knoppix nodhcp lang=en ramdisk_size=100000 init=/etc/init apm=power-off nomce vga=791 initrd=miniroot.gz quiet BOOT_IMAGE=knoppix
What am I doing wrong?
Oh, and I extracted the contents of the Knoppix CD (including the 700MB "KNOPPIX" file) to the shared folder noted above (\\192.168.0.5\knoppix), in case anyone's wondering.
According to the status message, you need to share the KNOPPIX files from the server by using NFS (Unix/Linux) file sharing instead of Microsoft Windows file sharing.
If you are Windows Server 2003 R2, you have a builtin option called "Microsoft Services for Network File System (NFS)" as part of the Microsoft Services for UNIX.
If you do not have Windows Server 2003 R2, you need to download the
"Microsoft Windows Services for UNIX (SFU) version 3.5" for free.
Or you can boot a PXE server from a different operating system like Linux, maybe even from KNOPPIX itself.
For more information of NFS SERVER under Mircosoft, use Google or check out this Wikipedia entry:
http://en.wikipedia.org/wiki/Microso...vices_for_UNIX
FYI,
That -13 error is an attempt to connect to the Win2003 box via the Windows file sharing protocol. It means that authentication failed for the attempted connection.
Google for
cifs_mount 13
for more information on the subject.
I have services for UNIX installed (v3.5) on the 2003 server. Here's how the folder is shared out:
Do I need to actually create a user account and password in services for UNIX instead of attempting anonymous access? If so, what is the syntax for supplying credentials in the pxelinux.cfg/default file?[/img]
Maybe a dumb question, but what if I just put the Knoppix CD in a drive of one of my Windows servers and shared the CD drive out? Would that work or is it still a limitation of Windows file sharing?
You might get it to work, but you would need to share it with file SECURITY permission EVERYONE = READ and also networks sharing permission EVERYONE = READOriginally Posted by jason331
The CD method didn't work...
I burned Knoppix to a CD, shared out the drive on a Windows server (non-domain controller) as well as an XP workstation with read access granted to the "everyone" group. Both times I still got the error mentioned above.
I'm pretty much a Linux newbie, but I do have an OpenSuSE box acting as an anti-spam gateway. What is the command to share out a folder on a Linux box and do I need to modify the pxelinux.cfg/default file any to connect to that? (other than the IP address, obviously)\
Alternatively, is there a way to provide credentials in the pxelinux.cfg/default file to connect to a Windows share?
Is there a way I can provide an HTTP location for the path in the pxelinux.cfg/default file? For example:
default knoppix
prompt 0
timeout 30
LABEL knoppix
KERNEL linux
APPEND secure http://192.168.0.5/knoppix nodhcp lang=en ramdisk_size=100000 init=/etc/init apm=power-off nomce vga=791 initrd=miniroot.gz quiet BOOT_IMAGE=KNOPPIX.dat
I tried this but it didn't work. It just get the following over and over no matter what I enter:
One item of note, I had to change BOOT_IMAGE=KNOPPIX.dat and rename the "KNOPPIX" file because my IIS6 server won't serve unknown or extensionless filetypes. Could that be the problem with my file above?
I also want to boot knoppix using the ris. But I don't even get to the thread starter's point.
I need to know which files I have to put where, I found some tutorials and every tut is using a different method.
Please give me a tutorial or a walkthrough, how to set this stuff up.
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
Team T-FORCE VULCAN Z 32GB (2 x 16GB) PC RAM DDR4 3200 (PC4 25600) Memory
$54.99
Crucial DDR3L 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3 16G DDR3
$22.45
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$23.95
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$9.64
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
Samsung 16GB (4x4GB) 1Rx8 PC3-12800U 1600Mhz DDR3 RAM Memory M378B5273DH0-CK0
$14.00
Crucial DDR3L 8GB 1x8GB 1600 MHz PC3L-12800 1.35V Laptop RAM Sodimm Memory
$13.50
Lot Of 10 Mixed Samsung 16GB 2Rx4 PC4-2133P RDIMM DDR4-17000 ECC Server Memory
$149.99
128GB (8x 16GB) DDR3 PC3-14900R ECC Server Memory HP DL360 DL380 DL580 G7 / G8
$48.99