Hallo,
nachdem das Remastern geklappt hat und ich jetzt von dem ISO starte, kann ich keine Konsole mehr öffnen und bekomme diese Fehlermeldung:
Laut dieser Anleitung http://www.knoppix.net/wiki/Knoppix_..._may_be_neededKonsole kann kein PTY Öffnen. Dies liegt wahrscheinlich an einem Fehler in der Einrichtung der PTY-Geräte. Konsole benötigt Lese- und Schreibzugriff auf die PTY- Geräte.
Aber wo ändere ich das???Leah 21:52, 11 Nov 2005 (GMT) I found that for some reason the permissions on /dev/pty were not being set to writable, so you couldn't open a konsole session on a new remaster, as it needs users to be able to access the pty's. I recommend making this change to the </path/to/develsystem>KNOPPIX.build/Knoppix.clean script as well, just in case. Change the (backslashes wrapping text here not present in script) line:
chmod 666 /dev/ttyp* /dev/sg* /dev/audio* \
/dev/dsp* /dev/mixer* /dev/sequencer*
to
chmod 666 /dev/pty* /dev/ttyp* /dev/sg* /dev/audio* \
/dev/dsp* /dev/mixer* /dev/sequencer* /dev/null
Gruß
Smokyjoe
[/url][/quote]
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
LSI 9207-8i 8-Port SAS Non-RAID 6GBPS PCIe Host Bus Adapter
$34.95
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
LSI 9223-8I 6GBPS PCIe SAS Internal RAID Controller
$22.75
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
NEW LSI MEGARAID SAS 9361-8i 12GB/s SAS + SATA RAID CONTROLLER CARD PCIe x8 3.0
$99.00