-
"can't find KNOPPIX filesystem."
I've created a knoppix live cd, version 5.0.1, and i'm trying to boot it on my laptop but i keep getting the error:
"Can't find KNOPPIX filesystem. sorry.
Dropping you to a (very limited) shell.
Press reet button to quit.
Additional builtin commands availible:
cat mount umount insmod rmmof lsmod
knoppix_"
I've tried creating a 2nd disc, i've downloaded an older version and tried that, twice, using different software to create the disc and burning and 4x or 8x speed. I've tried numerous commands including nodma, failsafe plus all four "tips and tricks" commands on the wiki/cheat_codes page on this site.
anyone got any new ideas?
-
can't find knoppi filesystem
Two main reasons not to find the filesystem :
1 the "cdrom" is not found due to either ide-cd or scsi-cd (sr0) not properly loaded at boot (any away not builtin into kernel)
2 the cdrom found but not the KNOPPIX compressed file ,due to either improper cloop.ko (if cloop is used ) not fitted with kernel version in use or bad squashfs (not loaded, bad version 3.4 is quite different from < 3.3 )
Try debugging the following way when dropped into the "ash shell" .(you really need to examine /proc/_procfs because ash is so poor in commands compared to any recent busybox )
a cat /proc/filesystems to see which filesystems are recognised by the kernel
b cat /proc/modules to see what modules had been loaded properly
c ls /sys/block to see what block devices are recognised (lost of "ramj" ramdisk ,may be hdx or sdx depending on what
had been raised in config_compile_kernel with IDE and/or scsi stuffs )
d try mount /dev/whateverseenin_c /cdrom && ls /cdrom
if nothing seen in cdrom mounted then you spot your problem !
HTH
Similar Threads
-
By thomania in forum German Forum
Replies: 6
Last Post: 01-21-2009, 10:14 PM
-
By ngc in forum Hardware & Booting
Replies: 3
Last Post: 09-28-2008, 12:37 PM
-
By yosibeck in forum Hardware & Booting
Replies: 4
Last Post: 06-26-2005, 08:26 PM
-
By redss in forum Hardware & Booting
Replies: 5
Last Post: 03-26-2005, 05:11 AM
-
By lothario in forum Hardware & Booting
Replies: 1
Last Post: 03-06-2005, 08:14 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell R730 w/ 2x E5-2650v3 10c, 192GB (12x16GB) RAM, H730 Mini, 2x 750W PSU
$499.99
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Supermicro X10SRW-F Server
$169.99
Dell EMC NX3230 Server
$599.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HYVE ZEUS V1 1U BAREBONE SERVER 2X10CORE E5-2680V2 2.8GHz 16GB RAM RISER NO RAIL
$180.00
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
PowerEdge R710 Rackmount Server 80GB RAM 2x XEON E5520 CPU 4.75TB
$200.00