Oh, and I extracted the contents of the Knoppix CD (including the 700MB "KNOPPIX" file) to the shared folder noted above (\\192.168.0.5\knoppix), in case anyone's wondering.
Hi everyone,
I'm trying to setup Knoppix on my LAN so that if needed I can PXE boot into a graphical recovery/test/forensics environment. We are a purely Microsoft shop so we use Windows 2003 RIS (Remote Installation Services). I have Knoppix to the point now where it boots from RIS/PXE but can't find the file needed to load the desktop environment. (see screenshot below)
The share is on a Windows 2003 server shared out using native Windows file sharing. I can browse to this share using a workstation not joined to the domain and I am not prompted for credentials so I know anonymous access to that share is working. Here is a copy of my pxelinux.cfg/default file on the RIS server:
default knoppix
prompt 0
timeout 30
LABEL knoppix
KERNEL linux
APPEND secure nfsdir=//192.168.0.5/knoppix nodhcp lang=en ramdisk_size=100000 init=/etc/init apm=power-off nomce vga=791 initrd=miniroot.gz quiet BOOT_IMAGE=knoppix
What am I doing wrong?
Oh, and I extracted the contents of the Knoppix CD (including the 700MB "KNOPPIX" file) to the shared folder noted above (\\192.168.0.5\knoppix), in case anyone's wondering.
According to the status message, you need to share the KNOPPIX files from the server by using NFS (Unix/Linux) file sharing instead of Microsoft Windows file sharing.
If you are Windows Server 2003 R2, you have a builtin option called "Microsoft Services for Network File System (NFS)" as part of the Microsoft Services for UNIX.
If you do not have Windows Server 2003 R2, you need to download the
"Microsoft Windows Services for UNIX (SFU) version 3.5" for free.
Or you can boot a PXE server from a different operating system like Linux, maybe even from KNOPPIX itself.
For more information of NFS SERVER under Mircosoft, use Google or check out this Wikipedia entry:
http://en.wikipedia.org/wiki/Microso...vices_for_UNIX
FYI,
That -13 error is an attempt to connect to the Win2003 box via the Windows file sharing protocol. It means that authentication failed for the attempted connection.
Google for
cifs_mount 13
for more information on the subject.
I have services for UNIX installed (v3.5) on the 2003 server. Here's how the folder is shared out:
Do I need to actually create a user account and password in services for UNIX instead of attempting anonymous access? If so, what is the syntax for supplying credentials in the pxelinux.cfg/default file?[/img]
Maybe a dumb question, but what if I just put the Knoppix CD in a drive of one of my Windows servers and shared the CD drive out? Would that work or is it still a limitation of Windows file sharing?
You might get it to work, but you would need to share it with file SECURITY permission EVERYONE = READ and also networks sharing permission EVERYONE = READOriginally Posted by jason331
The CD method didn't work...
I burned Knoppix to a CD, shared out the drive on a Windows server (non-domain controller) as well as an XP workstation with read access granted to the "everyone" group. Both times I still got the error mentioned above.
I'm pretty much a Linux newbie, but I do have an OpenSuSE box acting as an anti-spam gateway. What is the command to share out a folder on a Linux box and do I need to modify the pxelinux.cfg/default file any to connect to that? (other than the IP address, obviously)\
Alternatively, is there a way to provide credentials in the pxelinux.cfg/default file to connect to a Windows share?
Is there a way I can provide an HTTP location for the path in the pxelinux.cfg/default file? For example:
default knoppix
prompt 0
timeout 30
LABEL knoppix
KERNEL linux
APPEND secure http://192.168.0.5/knoppix nodhcp lang=en ramdisk_size=100000 init=/etc/init apm=power-off nomce vga=791 initrd=miniroot.gz quiet BOOT_IMAGE=KNOPPIX.dat
I tried this but it didn't work. It just get the following over and over no matter what I enter:
One item of note, I had to change BOOT_IMAGE=KNOPPIX.dat and rename the "KNOPPIX" file because my IIS6 server won't serve unknown or extensionless filetypes. Could that be the problem with my file above?
I also want to boot knoppix using the ris. But I don't even get to the thread starter's point.
I need to know which files I have to put where, I found some tutorials and every tut is using a different method.
Please give me a tutorial or a walkthrough, how to set this stuff up.
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
Lot of 2 -Dell P2R3R PERC H330 Mini Mono 12Gbps SAS Non-raid Controller 0P2R3R
$39.99
HPE 727263-003 BL460c G9 Raid BBWC Smartstorage Battery
$24.99
HPE 869102-001 Smart Array E208i-a SR Gen10 Storage Controller RAID SP: 871039
$129.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$86.99
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Lenovo 930-16i PCIe SAS RAID Controller FRU P/N: 01KN508 Tested Working
$149.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99