-
Remastering HOW TO Knoppix 6.01 with VMWare
Hi!
Going through the remastering process can be very time consuming, especially if you have to burn media to boot for testing. I was finally able to find a good combination to test using VMWare and ISO images mounted as CD for the VM.
!!! IMPORTANT NOTE !!! Only works for 6.01 if you need networking without installation of VMWare tools.
HOW TO
- * Download VMWare that runs on top of your existing Windows installation. This is the free version.
* Create a new virtual machine choosing Debian Linux, 1 GB of Ram and 16GB of disk.
* Copy the KNOPPIX ISO to the same sub directory that your vmk disk file is in.
* Add New Hardware to your newly created virtual machine and add the KNOPPIX ISO as a CD drive.
* Start your virtual machine. This will boot with network if all is well. It did for me. This is important if you want to run apt-get in your chroot environment. I was not able to get the network to come up with the earlier KNOPPIX versions.
* Run fdisk on VM ware virtual disk, for me this /dev/sda and create a Linux partition.
* Create and ext2 file system using mkfs on /dev/sda1.
* Mount the new disk, mount /mnt/sda1
* Create a 1GB swap file using the Remastering instructions on /mnt/sda1.
* Turn on swap, swapon /mnt/sda1/swapfile
* Use /mnt/sda1 for remastering disk space.
* Copy the ISO file out of VM ware to the directory with your VM virtual disk and KNOPPIX ISO file directory.
* Stop your VM.
* rename your KNOPPIX ISO file to the same name but with an additional ".orig" extension.
* Now you can copy either the original or new ISO to the original KNOPPIX ISO to switch between the two and restart your VM.
* Once you are satisfied with your new ISO you'll need to remaster again using a NON VM environment. My ISO created by the VM ware instance would only boot in VM Ware and NOT as a regular boot. I do not know why.
* Copy your knx/ directory you created /mnt/sda1 to a USB drive for remastering on the source machine.
* Reboot your machine into KNOPPIX and remaster the ISO from the USB drive knx/ directory. Place the final ISO on the USB.
* Reboot into Windows. Test the final image in your VM Ware environment before burning for testing on a real machine.
Note the network came up fine and I never installed the VM Ware tools.
Similar Threads
-
By Nikolay in forum Customising & Remastering
Replies: 4
Last Post: 03-25-2005, 12:12 PM
-
By Josh83 in forum MS Windows & New to Linux
Replies: 2
Last Post: 03-17-2005, 06:47 PM
-
By Ish Rattan in forum General Support
Replies: 3
Last Post: 05-20-2004, 04:49 AM
-
By PrOCesSkIlL in forum Customising & Remastering
Replies: 29
Last Post: 04-02-2004, 01:32 AM
-
Replies: 4
Last Post: 02-01-2004, 06:44 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco GLC-FE-100FX-RGD 100BASE-FX SFP Transceiver Module
$17.99
Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module
$24.99
Cisco Meraki MA-SFP-10GB-SR 10G SFP+ SR 850nm 300m LC MMF
$29.99
CISCO SFP GLC-GE-100FX 10-2019-02 100Base-FX SFP GBIC Transceiver Module 1pcs
$52.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
Genuine Cisco SFP-10G-SR Transceiver Module (10-2415-03)
$5.85
New HP HPE Aruba J9150D 10G SFP+ LC SR 850nm 300m MMF XCVR Transceiver Module
$49.99
10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module
$85.00