nevermind, recopied at a slower burn rate as per suggestions elsewhere on the forum. allles gut.
So I've decided to take the initial plunge into Linux. Downloaded Knoppix Live CD and after some trial and error finaly got a bootable CD burned. Thing started nicely then I got messages
su: Module is unknown
INIT: ID "1" respawning too fast; disabled for 5 minutes
both lines repeat several times with the INIT: ID going through "1" - "10" although not nescessarily in numerical sequence.
I have no clue what's happening other than that the install is hanging up. Is this bad media or a hardware issue? Any ideas appreciated.
nevermind, recopied at a slower burn rate as per suggestions elsewhere on the forum. allles gut.
Kslip, great that you found answer yourself. searching this forum WILL answer most questions.
keep asking as other questions pop up and sorry I missed this yesterday
Dell R730 w/ 2x E5-2650v3 10c, 192GB (12x16GB) RAM, H730 Mini, 2x 750W PSU
$499.99
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
$169.99
$209.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
HP ProLiant DL360 G9 2x Xeon E5-2690 V3 24 Cores 2.6GHz P440ar 32GB DDR4
$119.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
PowerEdge R710 Rackmount Server 80GB RAM 2x XEON E5520 CPU 4.75TB
$200.00