For clarification I have 2 40Gb IDE hard drives in my Fedora box. When I boot Knoppix it only sees /media/sda1 my old boot partition.
Hi,
I am using Knoppix v6.2 to recover some file off my Fedora 12 box. The install of the Fedora 12 upgrade went bad.
I have a copy of Knoppix Hacks and on page 226 (Hack #75) Kyle describes mounting a Raid drive. When I use the mdadm command as described I get a error message “No such file or directory”. See results below.
#####
knoppix@Microknoppix:~$ fdisk /dev/sda
The number of cylinders for this disk is set to 4865.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): p
Disk /dev/sda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000f053e
Device Boot Start End Blocks Id System
/dev/sda1 * 1 25 200781 83 Linux
/dev/sda2 26 4865 38877300 8e Linux LVM
Command (m for help): q
knoppix@Microknoppix:~$ sudo modprobe md
knoppix@Microknoppix:~$ sudo mdadm --assemble --auto=yes /dev/md0 /dev/hda1 /dev/hdb1
mdadm: cannot open device /dev/hda1: No such file or directory
mdadm: /dev/hda1 has no superblock - assembly aborted
knoppix@Microknoppix:~$ sudo mdadm --assemble --auto=yes /dev/md0 /dev/sda1 /dev/sda2
mdadm: no recogniseable superblock on /dev/sda1
mdadm: /dev/sda1 has no superblock - assembly aborted
knoppix@Microknoppix:~$
########
Thanks for your time,
Val
For clarification I have 2 40Gb IDE hard drives in my Fedora box. When I boot Knoppix it only sees /media/sda1 my old boot partition.
Juniper SRX650 VPN Firewall Security Hub SRX650-BASE-SRE6-645AP w/SRX-GP-IM
$99.99
Juniper MX-MPC2-3D-A Router Card + MIC-3D-4XGE-XFP-A & MIC-3D-20GE-SFP
$799.99
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper Networks EX4300-48T 48 Port Gigabit 4 QSFP 40G 2xPSU AFO Network Switch
$89.00
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$40.18
Juniper EX2300-24P Poe+ Rack Mountable Ethernet Switch
$130.00
Juniper Networks EX3300-24P | 24 Port Gigabit Network Switch w/ Power cord
$53.99
Juniper Networks EX2300-C 12-Port 2XSFP Uplinks PoE+ Switch P/N: EX2300-C-12P
$299.99
Juniper QFX5100-48T-AFO 48 100M/1G/10G Base-T 6 QSFP AFO
$485.00
Juniper Networks EX3400-48T 48 Port Gigabit 4 SFP 1/10G Network Switch #73
$239.99