-
how do i get screen resolution 1024x768 to stick on an hd install?
Just a silly question, I've got knoppix installed to the hard drive and it works quite nicely. However, every time I boot, the resolution is auto-detected at 1600x1200 and I am used to 1024x768. On each boot, I have to manually change the resolution which is easy to do, but after the 100th time... How do you get the resolution to "stick" after a reboot. Thanks, Don
-
Originally Posted by
don999
Just a silly question, I've got knoppix installed to the hard drive and it works quite nicely. However, every time I boot, the resolution is auto-detected at 1600x1200 and I am used to 1024x768. On each boot, I have to manually change the resolution which is easy to do, but after the 100th time... How do you get the resolution to "stick" after a reboot. Thanks, Don
Hey-
Good to hear you're using Knoppix! Just need some details to know which way to steer you. Did you use the hdinstall script, or do a "poor mans' install", i.e this:
Code:
knoppix tohd=/dev/sda1
from the Knoppix boot command line? If the latter, did you create a "persistent store file" when prompted? That would allow changes to 'stick'. Or perhaps you mis-spoke, and meant that you're booting into the LiveCD environment each time - that would not allow changes to stick. There are some useful tips in the Knoppix cheatcodes file, which you can get from the KNOPPIX folder on the CD even in Windows, or here, for instance.
Let us know!
Cheers!
Krishna
-
Hi Krishna, Yes I'm still using knoppix! When I heard about the 6.3 linuxmagazine DVD I had to rush out and buy it. I used the 0wn installer (in Preferences/Knoppix HD install) and most settings will stick (like turning off the compiz corner actions, it took me forever to figure out out to do that heh heh). I suppose I could try editing the bootup cheatcodes in grub... Don
Originally Posted by
krishna.murphy
Hey-
Good to hear you're using Knoppix! Just need some details to know which way to steer you. Did you use the hdinstall script, or do a "poor mans' install", i.e this:
Code:
knoppix tohd=/dev/sda1
from the Knoppix boot command line? If the latter, did you create a "persistent store file" when prompted? That would allow changes to 'stick'. Or perhaps you mis-spoke, and meant that you're booting into the LiveCD environment each time - that would not allow changes to stick. There are some useful tips in the Knoppix cheatcodes file, which you can get from the KNOPPIX folder on the CD even in Windows, or
here, for instance.
Let us know!
Cheers!
Krishna
-
success! I edited /boot/grub/menu.lst and added screen=1024x768 onto the knoppix command line. SWEET!!!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
WD 500GB My Passport SSD, Portable External Solid State Drive WDBAGF5000ARD-WESN
$59.99
Western Digital 1TB WD Blue SA510 SATA SSD Internal 2.5”/7mm Cased - WDS100T3B0A
$89.99
Western Digital 250GB WD Blue SA510 SATA SSD, Internal M.2 2280 - WDS250G3B0B
$39.99
SanDisk 2TB Ultra 3D NAND SSD, Internal Solid State Drive - SDSSDH3-2T00-G26
$149.99
Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5" SATA 3 6GB/s Internal SSD PC/MAC Lot
$14.99
Micron 5100 MAX 120GB SATA 6Gb/s 2.5" Internal SSD MTFDDAK120TCC Solid State
$9.89
Netac 1TB 2TB 512GB Internal SSD 2.5'' SATA III 6Gb/s Solid State Drive lot
$13.99
Fanxiang SSD 512GB 1TB 2TB 4TB 2.5'' SSD SATA III Internal Solid State Drive lot
$13.99
M.2 NVMe SSD 128GB 256GB 512GB Single Notch with Windows Installed 10 / 11
$85.25
Fanxiang M.2 SATA SSD 2TB 1TB 512GB 256GB SSD Internal M2 Solid State Drive Lot
$109.99