ps
.
It may be that quotes are necessary for the statements.
Here's mine:
Code:# $Id: 15x11-synaptics $ # This file is sourced by Xsession(5), not executed. # Disable built-in Touchpad. # synclient "TouchpadOff=1" #
g'day, Peter.
You probably know this, but:
Just to make sure, 15x11-snaptics properties may need to be root:root.
Mine are.
ps
.
It may be that quotes are necessary for the statements.
Here's mine:
Code:# $Id: 15x11-synaptics $ # This file is sourced by Xsession(5), not executed. # Disable built-in Touchpad. # synclient "TouchpadOff=1" #
Another approach might be to take your script and add it to /etc/rc.local.
This file should also be root:root AND executable. We really should see your script
before you do this.
But I am surprised the Xsession.d approach doesn't work for you.
Let us know how it goes in any event.
Can't really put that in /etc/rc.local because the program synclient need to contact the X server.
OK there is some further details need to take note about the script synclient, there must be no spaces between the equal sign, the quotes are optional however :-
synclient TouchpadOff=1 - works
synclient TouchpadOff =1 - does not work
synclient TouchpadOff = 1 - does not work
synclient "TouchpadOff=1" - works
Because when you open an xterminal, there is an environment variable called DISPLAY.
$ echo $DISPLAY
:0
$ set | grep DISPLAY
DISPLAY=:0
However, when you run it in rc, the DISPLAY is not set, so synclient does not know which Xserver DISPLAY you are talking about.
$ unset DISPLAY
$ synclient -l
Failed to connect to X server
Hey fellas, this is the script I wrote, saved as the executable file called touchpad on my system at /home/knoppixsorry, the formatting is scrambling the message, hence at carriage return Also the reference to root:root - is that sudo su? thanks, Peter PerrosCode:#!/bin/bash synclient TapButton1=1 synclient TapButton2=2 synclient TapButton3=3 synclient HorizEdgeScroll=1 synclient VertEdgeScroll=1
--------------
I formatted it for you; please use the "Go Advanced" button and then the icon to insert code. Greetings Werner
Last edited by Werner P. Schulz; 03-13-2012 at 08:51 AM. Reason: formatted by moderator
Hey guys,
I think life would be a lot easier if Knoppix could emulate the touchpad support of Linux Mint 12 LXDE.
I really can't spend more time on this. I really want something that is easy to use. Love the eye candy though...
Thanks guys.
Peter Perros.
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
Crucial DDR3L 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3 16G DDR3
$21.50
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$15.90
Samsung 8GB 2Rx8 DDR3 PC3L-12800S LAPTOP SODIMM RAM MEMORY
$8.00
Crucial DDR3L 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3 16G DDR3
$13.50
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
32GB ECC DDR3 RAM 2x16GB PC3L-12800R Desktop/Server Memory
$11.99
Pair Kingston HyperX FURY 16GB (2X8GB) PC3-14900 DDR3-1866Mhz Non-ECC Memory
$18.95
A-Tech 128GB 8x 16GB 2Rx4 PC4-19200R DDR4 2400 ECC REG RDIMM Server Memory RAM
$175.92
Kingston HyperX FURY DDR3 8GB 16GB 32G 1600 1866 1333 Desktop Memory RAM DIMM
$39.95