-
Senior Member
registered user
Kind of minirt init changelog...
Here's the init changes (ADRIANE 6.7). Among other things, ext4 mounting is now in place.
Also, the kernels, both 32 and 64 bits, have grown a lot - probably heaps of extra modules included as deemed necessary.
Code:
";;
4c4
< # (C) 2011 by Klaus Knopper <knoppix@knopper.net>
---
> # (C) 2010 by Klaus Knopper <knoppix@knopper.net>
140,141d139
< local rc="1"
< # Try to be quick, and probe the "most likely" file systems first
146,161c144,146
< mount -t ext4 -o "$RW" "$1" "$2" || \
< mount -t ext3 -o "$RW" "$1" "$2" || \
< mount -t ext2 -o "$RW" "$1" "$2"
< rc="$?"
< # Still no luck? Try everything else that the (static) kernel supports
< if [ "$rc" != 0 ]; then
< local fs
< for fs in `awk '!/^nodev/{print $1}' /proc/filesystems 2>&1`; do
< case "$fs" in
< ext[234]|reiserfs|ntfs|fuse*|*fat|iso9660) ;; # Already did that
< *) mount -t "$fs" -o "$RW" "$1" "$2"; rc="$?";;
< esac
< [ "$rc" = "0" ] && break
< done
< fi
< return "$rc"
---
> mount -t ext3 -o "$RW" "$1" "$2" || \
> mount -t ext2 -o "$RW" "$1" "$2"
> return "$?"
303c288
< [ -r "$mod" -a ! -d /sys/module/"${mod%.ko}" ] && insmod "$mod" >/dev/null 2>&1
---
> [ -r "$mod" -a ! -d /sys/module/"${mod%.ko}" ] && insmod "$mod"
338c323
< *\ vga=[0-9]*|*debug*|*\ splash*) true;; *) echo -n "[0;0H[J";;
---
> *\ vga=[0-9]*|*debug*|*\ splash*) true;; *) echo -n "[6;0H[J";;
341,347d325
< message \
< ' _ __ __ __ _____ _____ _____ __ _ __ ___ _______
< / / / / / | / / / ___ \ / __ \ / __ \ / / | |/ / / ___/ \___ /
< / /__/ / / | / / / / / / / /__/ / / /__/ / / / \ / / /_ __/ /
< / / _ - / /| |/ / / / / / / _____/ / _____/ / / / | / __ \ /_ _\
< / / \ \ / / | / / /__/ / / / / / / / / /\ \ / /_/ / _ / /
< /_/ |_|/_/ |__/ \_____/ /_/ /_/ /_/ /_/ |_| \____/ /_/ /_/'
447,455c425
< #@@@GvR
< # Try using other (SMB) mounts
< [ -z "$MOUNTED" ] && [ -x /static/mount.cifs ] && { if [ -n "$NFSDIR" ]; then
< message -n "${CRE}${BLUE}Trying to SMB mount CD on ${MAGENTA}$NFSDIR${BLUE}...${NORMAL}"
< message /static/mount.cifs "${NFSDIR}" /mnt-system -r -o guest,noserverino,nounix
< /static/mount.cifs "${NFSDIR}" /mnt-system -r -o guest,noserverino,nounix > /dev/null 2>&1 && MOUNTED="yes"
< [ -z "$MOUNTED" ] && umount /mnt-system > /dev/null 2>&1
< fi; }
< #@@GvR
---
>
482c452
< checkbootparam "bootfrom" || debugshell
---
> debugshell
488,580d457
< # Return existing device names listed as regular expressions
< listpartitions(){
< local pattern file
< for pattern in "$@"; do
< for file in $(find /sys/class/block -maxdepth 2 -name "$pattern"); do
< file="${file##*/}"
< [ -b "/dev/$file" ] && echo "/dev/$file"
< done
< done
< # awk 'BEGIN{old="__start"}/'"$1"'/{if($0==old){exit}else{old=$0;if($4&&$4!="name"){print "/dev/"$4}}}' /proc/partitions # Insufficient, does not find CD-Roms
< }
<
< #@@@GvR Bootfrom Section start
< BOOTSYS="/mnt-system"
< if [ ! -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then
< # find BOOTFROM variable (/dev/sda1/boot/k620/*.iso)
< BOOTFROM=""; bootfrom="";
< for i in $CMDLINE; do case "$i" in [Bb][Oo][Oo][Tt][Ff][Rr][Oo][Mm]=*) eval $i;; esac; done
< [ -n "$bootfrom" ] && BOOTFROM="$bootfrom"
< if [ -n "$BOOTFROM" ]; then
< # we may have an ISO file, try mounting it
< BOOTISO="/mnt-iso"; BOOTDEV=""; BOOTFILE=""
< mkdir -p $BOOTISO $BOOTSYS
< [ -b /dev/loop1 ] || mknod -m 755 /dev/loop1 b 7 1
< if [ -n "$NFSDIR" ]; then
< umount $BOOTSYS; MOUNTED=""
< message nfs remount "${NFSDIR}" "${BOOTISO}" -o ro,rsize=8192,wsize=8192,hard,nolock,intr$SECUREOPTIONS
< mount "${NFSDIR}" "${BOOTISO}" -o ro,rsize=8192,wsize=8192,hard,nolock,intr$SECUREOPTIONS > /dev/null 2>&1 && MOUNTED="yes"
< if [ -z "$MOUNTED" ]; then
< umount $BOOTISO >/dev/null 2>&1
< if [ -x /static/mount.cifs ]; then
< message cifs remount "${NFSDIR}" "${BOOTISO}" -r -o guest,noserverino,nounix
< /static/mount.cifs "${NFSDIR}" "${BOOTISO}" -r -o guest,noserverino,nounix > /dev/null 2>&1 && MOUNTED="yes"
< [ -z "$MOUNTED" ] && umount $BOOTISO > /dev/null 2>&1
< fi
< fi
< BOOTFILE=$BOOTFROM
< else
< BOOTDEV=$(echo "$BOOTFROM" | awk -F/ '{print $1"/"$2"/"$3}')
< BOOTFILE="${BOOTFROM#*/}"; BOOTFILE="${BOOTFILE#*/}"; BOOTFILE="${BOOTFILE#*/}"
< message -n "${CRE}${BLUE}Trying to mount the ISO partition ${MAGENTA}$BOOTDEV${BLUE}...${NORMAL}"
< trymount "$BOOTDEV" "$BOOTISO" >/dev/null 2>&1
< fi
< if [ ! -r "$BOOTISO/$BOOTFILE" ]; then umount $BOOTISO >/dev/null 2>&1
< message "${CRE}${RED}Cannot mount the partition ${MAGENTA}$BOOTDEV${NORMAL} (cannot find: ${RED}${BOOTISO}/${BOOTFILE}${NORMAL})"
< ls -al "$BOOTISO"
< else
< message -n "${CRE}${BLUE}Trying to mount CD image on ${MAGENTA}${BOOTFILE}${BLUE}...${NORMAL}"
< losetup /dev/loop1 "$BOOTISO/$BOOTFILE" && mount -r /dev/loop1 $BOOTSYS >/dev/null 2>&1
< if [ ! -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then umount $BOOTSYS >/dev/null 2>&1
< message -n "${CRE}${RED}Cannot mount CD image on ${MAGENTA}${BOOTFILE}${NORMAL}"
< umount "$BOOTSYS" >/dev/null 2>&1
< losetup -d /dev/loop1 >/dev/null 2>&1
< else
< message -e "\r${CRE}${GREEN}$DISTRO ${FOUNDAT}: ${MAGENTA}${BOOTDEV}/$(cd $BOOTISO; ls -a $BOOTFILE)${NORMAL} "
< fi
< fi
< # try to find ISO in an alternate locations using the same path
< if [ ! -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then
< message -n "${CRE}${MAGENTA}Trying to find the ISO image in an other partition...${NORMAL}"
< # If USB storage device, wait for USB...
< if [ -d /sys/bus/usb/drivers/usb-storage ]; then WUSB="1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20"; else WUSB="1"; fi
< for i in $WUSB ; do
< for BOOTDEV in $(listpartitions 'hd[a-z]' 'hd[a-z][0-9]*' 'scd[0-9]*' 'sr[0-9]*' 'sd[a-z]' 'sd[a-z][0-9]*'); do
< if [ -b "$BOOTDEV" ]; then
< message -n -e "\r${CRE}${BLUE}Searching for ISO in: ${MAGENTA}${BOOTDEV}${NORMAL} "
< trymount "$BOOTDEV" "$BOOTISO" > /dev/null 2>&1
< if [ ! -r "$BOOTISO/$BOOTFILE" ]; then umount $BOOTISO >/dev/null 2>&1; else
< message -n "${CRE}${BLUE}Trying to mount CD image on ${MAGENTA}${BOOTFILE}${BLUE}...${NORMAL}"
< losetup /dev/loop1 "$BOOTISO/$BOOTFILE" && mount -r /dev/loop1 $BOOTSYS >/dev/null 2>&1
< if [ ! -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then
< umount $BOOTSYS >/dev/null 2>&1
< losetup -d /dev/loop1 >/dev/null 2>&1
< else
< message -e "\r${CRE}${GREEN}$DISTRO ${FOUNDAT}: ${MAGENTA}${BOOTDEV}/$(cd $BOOTISO; ls -a $BOOTFILE)${NORMAL} "
< fi
< fi
< fi
< done
< if [ -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then
< break
< else
< message -n -e "\r${CRE}${BLUE}${WAITFORUSB}${NORMAL} $i ";
< sleep 1
< fi
< done
< fi
< fi
< fi
< if [ -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then MOUNTED="yes"; FOUND_KNOPPIX="true"; fi
< #@@@GvR Bootfrom Section end
<
<
582c459
< amount=$(awk -F: '/^MemTotal/{printf "%d",int($2); exit 0}' /proc/meminfo 2>/dev/null); #'
---
> amount=$(awk -F: '/^MemTotal/{printf "%d",int($2); exit 0}' /proc/meminfo 2>/dev/null)
594,607c471,481
< #@@@GvR add "ramdisk" parameter to allow specifying ramdisk size, otherwise just use max(ram*4/5,2000)M
< for i in $CMDLINE; do case "$i" in [Rr][Aa][Mm][Dd][Ii][Ss][Kk]=*) eval $i;; esac; done
< case "$ramdisk" in
< [0-9]*[KMG]) RAMDISK="$ramdisk" ;;
< esac
< if [ -z "$RAMDISK" ]; then
< if [ "$TOTALMEM" -ge 2000 ] >/dev/null 2>&1; then
< RAMDISK="$(expr $TOTALMEM / 5)"; RAMDISK="$(expr $RAMDISK \* 4)M"
< else
< # Too large, but we can still use swapspace
< RAMDISK="2G"
< fi
< fi
< #@@@GvR
---
> # Return existing device names listed as regular expressions
> listpartitions(){
> local pattern file
> for pattern in "$@"; do
> for file in $(find /sys/class/block -maxdepth 2 -name "$pattern"); do
> file="${file##*/}"
> [ -b "/dev/$file" ] && echo "/dev/$file"
> done
> done
> # awk 'BEGIN{old="__start"}/'"$1"'/{if($0==old){exit}else{old=$0;if($4&&$4!="name"){print "/dev/"$4}}}' /proc/partitions # Insufficient, does not find CD-Roms
> }
609c483
< if [ -z "$FOUND_KNOPPIX" -a -z "$TSCLIENT" ]; then
---
> if [ -z "$TSCLIENT" ]; then
650c524
< mount -t tmpfs -o size="$RAMDISK",dev,suid,exec tmpfs /ramdisk
---
> mount -t tmpfs -o size=2G,dev,suid,exec tmpfs /ramdisk
671c545
< [ -r /KNOPPIX/lib/ld-linux.so.2 -a -x /KNOPPIX/"$cmd" ] && /KNOPPIX/lib/ld-linux.so.2 --library-path "/KNOPPIX/lib:/KNOPPPIX/usr/lib:/KNOPPIX/lib/i386-linux-gnu" /KNOPPIX/"$cmd" "$@"
---
> [ -r /KNOPPIX/lib/ld-linux.so.2 -a -x /KNOPPIX/"$cmd" ] && /KNOPPIX/lib/ld-linux.so.2 --library-path "/KNOPPIX/lib:/KNOPPPIX/usr/lib" /KNOPPIX/"$cmd" "$@"
739c613
< for base in $home /mnt-system/"$knoppix_dir"/knoppix-data /mnt-system/knoppix; do
---
> for base in /mnt-system/"$knoppix_dir"/knoppix-data /mnt-system/knoppix; do
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
LSI 9207-8i 8-Port SAS Non-RAID 6GBPS PCIe Host Bus Adapter
$34.95
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
LSI 9223-8I 6GBPS PCIe SAS Internal RAID Controller
$22.75
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
NEW LSI MEGARAID SAS 9361-8i 12GB/s SAS + SATA RAID CONTROLLER CARD PCIe x8 3.0
$99.00