Results 1 to 7 of 7

Thread: DHCP

  1. #1
    Senior Member
    Join Date
    Jul 2011
    Posts
    110

    DHCP

    Im booting Knoppix 6.7 via pxe. Once Knoppix starts to load I get delay in DHCP during boot. The sending dhcp message appears for quiet some time. Then knoppix goes about its boot. The unit has an ip from the pxe process. So my question is, is this a knoppix delay or my pxe server? Any ideas?
    Thanks!

  2. #2
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    FWIW, no significant delay in normal (not pxe) use of dhcp.

  3. #3
    Senior Member
    Join Date
    Jul 2011
    Posts
    110
    So called normal use of DHCP within Knoppix doesnt begin until after X has started/loaded. Knoppix needs IP before X when pxe booting. I think it may be within minirt.gz the ini file itself. ?

  4. #4
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    I've contributed all I know for sure on this.
    But if pxe needs IP early, why isn't the server providing it already?

    Are you able to decode minirt.gz and read the init?

  5. #5
    Senior Member
    Join Date
    Jul 2011
    Posts
    110
    Yes, Ive just started to dig thru ini. I think DHCP server is confused by knoppix asking for an ip from the same mac addy that just requested ip?

  6. #6
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    FWIW,

    In 6.4.4 my LiveUSB took almost 120 seconds to get on-line initially.
    I finally disabled Network Manager and got down to about 55-or so seconds
    using a primitive /etc/rc.local routine to get my wifi going.

    In 6.7, there was no similar slow start to getting on-line in less than
    a minute and no need to circumvent Network Manager.

    Obviously either Knoppix or Network Manager must have changed between
    6.4.4 and 6.7. If you don't find the answer in minirt.gz, then you might
    see if there's some difference in NM that explains your situation.

  7. #7
    Senior Member
    Join Date
    Jul 2011
    Posts
    110
    Thanks for those ideas. I will post my findings. May take me a few days.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Watchguard XCS 570 Firewall SuperMicro 1U Server Intel 4GB VPN Router LINUX 🍁 picture

Watchguard XCS 570 Firewall SuperMicro 1U Server Intel 4GB VPN Router LINUX 🍁

$182.65



1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports picture

1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports

$149.00



PFSENSE 15

PFSENSE 15" Depth Server Router Firewall Supermicro X11SSH-F E3-1240 V5 32GB RAM

$382.00



SQL Server 2019 Standard (10 CAL) - Windows and Linux, Physical License picture

SQL Server 2019 Standard (10 CAL) - Windows and Linux, Physical License

$249.00



Domino Lotus Server 5.0.7 for OS/2 WSeB, RH Linux 6, Solaris, AIX, HP-UX, Win NT picture

Domino Lotus Server 5.0.7 for OS/2 WSeB, RH Linux 6, Solaris, AIX, HP-UX, Win NT

$60.00



Red Hat Enterprise Linux 5 Server - New and Sealed picture

Red Hat Enterprise Linux 5 Server - New and Sealed

$16.99



IBM CS821 20-Core 2.827GHz 128Gb 1.92Tb SSD 1U Linux Server - 8005-12N Power 8 picture

IBM CS821 20-Core 2.827GHz 128Gb 1.92Tb SSD 1U Linux Server - 8005-12N Power 8

$449.96



IBM E850 Power8 2x 12C 3.02GHz 512Gb 1.8Tb SAS 10GbE 16Gb Linux Server 8408-E8E picture

IBM E850 Power8 2x 12C 3.02GHz 512Gb 1.8Tb SAS 10GbE 16Gb Linux Server 8408-E8E

$674.96



Australia - Win/Linux Server- 2GB RAM, 1 Core,100 GB HD, Ultd Bandwidth 2 yrs picture

Australia - Win/Linux Server- 2GB RAM, 1 Core,100 GB HD, Ultd Bandwidth 2 yrs

$195.80



8x 240GB SSD 1U Rackmount Deduplication Compression Backup RAID Server X10DRW-iT picture

8x 240GB SSD 1U Rackmount Deduplication Compression Backup RAID Server X10DRW-iT

$499.00