I was trying to boot Knoppix 6.7.0 to a Lenovo T60. The hard drive was missing from the machine at the time. After entering in the boot options, (knoppix nodrm splash 2 apic=off) the machine rebooted when the screen blinked.
By "screen blinked" i mean after you enter in boot options, hit enter, and then it clears and normally starts showing the boot stuff. I see it clear, and then fade to deep black as the machine reboots. I never see a single line of text saying what it is doing.
If I put a hard drive in, it boots fine. I even tried "toram" on the boot options, but it doesn't get that far. Can anyone think of why it works with a HDD and not otherwise? this is off the CD. At first i thought it was bad memory. So I swapped that with some good stuff, and same result.
TIA.
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
LSI 9207-8i 8-Port SAS Non-RAID 6GBPS PCIe Host Bus Adapter
$34.95
Broadcom LSI 9400-16i Raid card SAS/SATA/NVME SFF-8643 SAS3416 PCIe 3.1 x8 HBA
$154.96
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
NEW LSI MEGARAID SAS 9361-8i 12GB/s SAS + SATA RAID CONTROLLER CARD PCIe x8 3.0
$99.00