While using knoppix 7.0.2, after going into "suspend" mode my system is back as it was before except for the network connectiion to the router. This is the error message I am getting when I try to get a new (or activate my old?) DHCP connection:
~Code:$ sudo netcardconfig eth0 Sending DHCP broadcast from device eth0Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/00:23:8b:98:6a:64 Sending on LPF/eth0/00:23:8b:98:6a:64 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 19 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 No DHCPOFFERS received. Unable to obtain a lease on first try. Exiting. Failed to bring up eth0.
How can I fix that?
~
thanks
lbrtchx
Last edited by Albretch; 08-01-2012 at 04:09 PM.
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2630V3 | 32GB | P244BR | 2x300GB 15K
$299.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Cisco UCS B200 M4 Blade Server, 2x2660 V3, 40GbE, No Ram No HDD
$35.95
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
HP ProLiant BL460c Gen9 Blade 2x E5-2680v3 2.5GHz =24 Cores 256GB P246 650FLB
$430.00
Dell PowerEdge M620 Blade Server
$39.99