Creating a boot floppy for Knoppix 6.4.4 seems impossible since the Linux kernel is too big to fit on a single floppy disk.
How to create boot floppy? Knoppix 6.4.4 CD.
Creating a boot floppy for Knoppix 6.4.4 seems impossible since the Linux kernel is too big to fit on a single floppy disk.
What's the latest version of Knoppix that will install on a USB stick, and have a kernel small enough to have on a boot floppy?
Your best hope is to chain boot, ie boot from floppy without the knoppix kernel, and chain boot into the USB stick. There is no knoppix kernel which is small enough to fit a floppy..
How do I chain boot?
There maybe more than one ways to do it.
But you can try this method which uses 'plop', ie you boot up from floppy using plop, then plop has built-in (usb) drivers to boot into linux resided on the usb.
Information on the net :-
http://www.linuxquestions.org/questi...anager-779779/
http://www.plop.at/
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
LSI SAS 9300-8i 8-Port PCIe SAS Non-RAID Host Bus Adapter 12GBPS AOC-S3008L-L8e
$58.40
Dell HBA330 12GBPS SAS Internal HBA Controller (NON-RAID) PCIe Card J7TNV 0J7TNV
$40.05
Broadcom LSI 9400-16i Raid card SAS/SATA/NVME SFF-8643 SAS3416 PCIe 3.1 x8 HBA
$154.96
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$86.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Lenovo 930-16i PCIe SAS RAID Controller FRU P/N: 01KN508 Tested Working
$149.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99