-
Junior Member
registered user
Pxe boot with Broadcom BCM5754 does not work
I am using Knoppix 6.7.0 in a PXE boot environment. I have remastered it a little bit to remove some packages and whatnot, but it's pretty vanilla. It's been working fine for a few months now, on lots of different hardwares.
I am having a problem with PXE booting a Dell 740 which has a Broadcom BCM5754 Gigabit card. I believe the problem is the firmware for the card, although I don't know. I can boot the machine using the Knoppix 6.7.0 CD, and it loads the NIC driver fine.
The exact behavior is this: I do the PXE boot, and it loads the minirt.gz image. I see kernel loading lines flash through the screen very very quickly, and then the machine reboots. It appears to be rebooting at the point it's trying to execute udhcp. I can't say with certainty because it is rebooting so fast. Sometimes so fast I barely see the kernel lines show up.
I booted to cd (also Knoppix 6.7.0) to diagnose what modules are loaded etc, and found that the tg3.ko module has 3 firmware files it loads. Those files are not in the minirt.gz packing. (but they are on the cd). So i copied the /lib/firmware folder to the minirt.gz, but it is not working. I then found a post on writing a custom hotplug script in /sbin/hotplug to load the firmware, but that does not seem to be executing, or if it is, it is not working. The article I found targeted Knoppix 5, so maybe it's not applicable anymore. (i tried to put an echo and a sleep to test, but for all i know it's in a background thread)
While I was at it, I modified the init script to not call the restart command in the bailout() function.
this does not stop the machine from rebooting!
I am at a loss as to how to diagnose this. It works from CD but not PXE, which shouts NIC, but I just don't know. I've tried removing the driver altogether to see if the script will pause and complain about no network / driver etc. No joy.
Any one have any ideas on how to approach this?
-
Junior Member
registered user
I booted to the CD and did a lsmod to get a list of everything. Then I used modinfo to go through the list for dependencies.
I then copied all of the .ko files to a drivers folder and renamed them to go in order. (ie, 0_ttm.ko, so that the nouveau.ko file can load).
I repacke the initram and rebooted, and this time the screen locks up with what looks like a kernel panic screen. This makes me feel like I'm moving in the right direction, but ... well, I put all of the kernel modules that I saw in /proc/modules. So I'm stumped again.
-
Junior Member
registered user
So i figured it out. and it makes no sense to me..
Somehow a while ago (like 5 months) I must have made a typeo when creating my customzed initrd. (this was when I was fixing the broadcomm b44.ko driver to work)
The root of the minirt.gz had a file called ..miniroot
I found it by accident. Once I removed that file and re-created the pxe minirt.gz it worked fine.
I don't understand how just this one model of machine broke, or even why it broke. but it's fixed now.
chalk this up to PEBKAC
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco Nexus 48-Port 10G SFP+ Switch N9K-9396PX w/ 9K-M12PQ 12-Port 40G QSFP
$419.99
Cisco GLC-FE-100FX-RGD 100BASE-FX SFP Transceiver Module
$17.99
Lot of 10pcs Brocade 57-1000012-01 8Gbps SWL 850nm SFP+ Optical Transceivers
$19.00
CISCO SFP GLC-GE-100FX 10-2019-02 100Base-FX SFP GBIC Transceiver Module 1pcs
$52.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
Genuine Cisco SFP-10G-SR Transceiver Module (10-2415-03)
$5.85
10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module
$85.00
New HP HPE Aruba J9150D 10G SFP+ LC SR 850nm 300m MMF XCVR Transceiver Module
$49.99