I just tried to boot Knoppix on a pair of new Dell Optiplex 390 systems. I get:
Could not mount disk to /mnt-system. Starting debugging Shell...
?: can't access tty; job control turned off
(The ? falls of the edge of my cheap old LCD).
I got this error with Knoppix 6.4.4, so I burned a new 6.7.1 disc and got the same error. I have tried the following cheat codes:
knoppix vga=0
knoppix acpi=off pnpbios=off noapic noapm
knoppix vga=0 debug -b 3
failsafe debug -b 3
The system has a Pentium G630, on-processor video (HD Graphics 200), Intel H61 Express chipset, 4GB RAM, SATA hard drive and DVD drive.
Thanks!
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$477.99
Cisco WSA S390 Server UCS C220 M4 | 1x Xeon E5-2620v3 32GB RAM No Storage
$111.96
HPE ProLiant DL360 Gen9 4LFF 2x E5-2650v4 2.2GHz =24 Cores 64GB P440AR 4xRJ45
$262.00
Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 32-Cores / 64gb / H730 / iDracEnt
$309.99
Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD
$125.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R620 Server - 256GB RAM, 2x8cCPU, 120Gb SSD/3x900Gb SAS, Proxmox
$320.00
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
DELL R630 Server 2x E5-2650v3 2.3GHz =20 Cores 64GB H730 4x 1.2TB SAS 4xRJ45
$350.00
Dell Poweredge R630 2x Xeon E5-2667 v3 3.2ghz 16-Cores / 64gb / H730 / iDracEnt
$274.99