I just tried to boot Knoppix on a pair of new Dell Optiplex 390 systems. I get:
Could not mount disk to /mnt-system. Starting debugging Shell...
?: can't access tty; job control turned off
(The ? falls of the edge of my cheap old LCD).
I got this error with Knoppix 6.4.4, so I burned a new 6.7.1 disc and got the same error. I have tried the following cheat codes:
knoppix vga=0
knoppix acpi=off pnpbios=off noapic noapm
knoppix vga=0 debug -b 3
failsafe debug -b 3
The system has a Pentium G630, on-processor video (HD Graphics 200), Intel H61 Express chipset, 4GB RAM, SATA hard drive and DVD drive.
Thanks!
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2630V3 | 32GB | P244BR | 2x300GB 15K
$299.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Cisco UCS B200 M4 Blade Server, 2x2660 V3, 40GbE, No Ram No HDD
$35.95
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge VRTX Rack Chassis 25-Bay 14.4TB HDD 2x M640 Blade 512GB RAM 2-Bay
$1979.99
Dell PowerEdge M620 Blade Server
$39.99
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99