-
-
Knoppix 64 bit hd-install
I had the same problem (knoppix64 hd-install) today, doing a hd-install of knoppix 6.7
in /boot i found a "vmlinuz-3.0.4-64" kernel image to which i created the softlink "vmlinuz64" in the same directory /boot being root
i altered the file /boot/grub/menu.lst as root to make the new 64bit Kernel appear there:
(...)
title KNOPPIX
root (hd1,0)
kernel /boot/vmlinuz64 root=/dev/sdb1 rootwait lang=de apm=power-off nomce libata.force=noncq tz=localtime loglevel=1 desktop=kde rw
(...)
i hope you use grub. if not, i'd try to redirect the "vmlinuz" link in /boot to your 64bit kernel image there, eg. something with "vmlinuz" and "64" in the filename. For me it was "vmlinuz-3.0.4-64"
the system now uses 64bit as i can use my 8gb ram. it shows some errors at bootup which i don't understand but nothing critical so far
i'd like to hear your experience since i myself am unsure if i should use this for production work.
cheers, christian
Last edited by Werner P. Schulz; 06-19-2012 at 04:59 PM.
Reason: not Knoppix line deleted
-
Senior Member
registered user
I'm using 7.0.2 with the 3.3.7 64-bits kernel all the time, but I mostly use Poor Man's Installs (PMIs): Just copy the KNOPPIX directory to somewhere harddisked, and make a (legacy) GRUB entry with the necessary directions. No problems whatsoever with that. But I cant remember i had trouble with the 0wn-install either. And I don't think there are, normally, any bootup errors.
I have found PMIs to be safest for production work: The system is, essentially, mounted read-only if you take care and stay independent of the persistent store for system tasks.
-
my above quoted method doesn't work out. i could not save any data in the end.
-----
full quote deleted by moderator
Last edited by Werner P. Schulz; 07-26-2012 at 08:30 PM.
Reason: full quote deleted
-
Junior Member
registered user
Boooting to 64 bit Knoppix: SOLUTION
Hi all,
Just wanted to let you know how i managed to do this successfully. I noticed that the standard 32 bit was not reading all my memory (6GB) reported as like 2-3 Gb. So what i did is get a DVD iso (I still like the CD version to start), mounted it and and literally copied the /mnt/dvd/lib/modules/3.0.4-64 directory over to my booted (but driverless) 64 bit linux in /lib/modules/3.0.4-64. Once that is done, you can add a boot option to use the /boot/syslinux/linux64 instead. You will need to reboot once this is done of course.
I just did this for 7.0.4 as well. here's some of my boot entries (note that I always treat my ntfs boot partition as a big USB install) and I have multiple KNOPPIX dirs: KNOPPIX70, KNOPPIX67, KNOPPIX64 (the knoppix_dir= boot option allows multiple versions of knoppix separated by dir) and multiple boot/syslinux{70,67,64} dirs. I think the 3.0.4-64 drivers are ~ 100Mb.
Code:
title knoppix64_6.7
root (hd0,1)
kernel /Boot/syslinux/linux64_67 knoppix_dir=KNOPPIX67 ramdisk_size=100000 lang=en vt.default_utf8=0 apm=power-off nomce libata.force=noncq loglevel=1 tz=EST5EDT
initrd /Boot/syslinux/minirt67.gz
title knoppix32_7.0
root (hd0,1)
kernel /Boot/syslinux70/linux knoppix_dir=KNOPPIX70 ramdisk_size=100000 lang=en apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 ide1=reset1 tz=EST5EDT
initrd /Boot/syslinux70/minirt.gz
title knoppix64_7.0
root (hd0,1)
kernel /Boot/syslinux70/linux64 knoppix_dir=KNOPPIX70 ramdisk_size=100000 lang=en apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 ide1=reset1 tz=EST5EDT
initrd /Boot/syslinux70/minirt.gz
title knoppix64_7.0_usb
root (hd1,0)
kernel /Boot/syslinux70/linux64 knoppix_dir=KNOPPIX70 ramdisk_size=100000 lang=en apm=power-off initrd=minirt.gz nomce libata.force=noncq loglevel=1 hpsa.hpsa_allow_any=1 tz=EST5EDT
initrd /Boot/syslinux70/minirt.gz
title knoppix64_6.4
root (hd0,1)
kernel /Boot/syslinux/linux64 ramdisk_size=100000 lang=en vt.default_utf8=0 apm=power-off initrd=minirt.gz nomce libata.force=noncq loglevel=1 tz=EST5EDT
initrd /Boot/syslinux/minirt.gz
-
force 64 bit install
Hi, I am a total newbi. Can you give me step by step instructions to force my 7.0.4 install as 64 bit? it has already installed as 32 bit. thanks
-------
Fullquote deleted
wps
Last edited by Werner P. Schulz; 06-23-2013 at 12:16 PM.
-
I just saw on http://knopper.net/knoppix/knoppix704-en.html that
"Optional 64-bit Kernel via boot option "knoppix64", supporting systems with more than 4GB of RAM and chroot to 64-bit installations for system rescue tasks (DVD version only). "
so I have to download and install the DVD version?
Then I can run flash-knoppix to create a bootable USB stick?
Am I correct? I will let you know
-
Senior Member
registered user
Originally Posted by
mikeymike
I just saw on
http://knopper.net/knoppix/knoppix704-en.html that
"Optional 64-bit Kernel via boot option "knoppix64", supporting systems with more than 4GB of RAM and chroot to 64-bit installations for system rescue tasks (DVD version only). "
so I have to download and install the DVD version?
Then I can run flash-knoppix to create a bootable USB stick?
Am I correct? I will let you know
You don't have to install - just run the DVD, and use that for creating the bootable USB stick. Booting that with option knoppix64 starts 64 bits kernel. (I often create the stick by running the DVD image, bypassing DVD creation and booting, but then you either need to boot from ISO or run a virtualization program.)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HP ProLiant DL380 Gen9 8SFF Server - E5-2698 v3 - 32Cores - 128GB Ram - 1TB HDD
$299.00
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 64GB H730 4xRJ45
$314.00
Dell Poweredge R730xd 2.5in 2x E5-2690 v3 2.6ghz 24-Cores 64gb H730 2x 750w
$189.99
HP ProLiant DL360 Gen9 Server 2x E5-2699v3 2.3GHz =36 Cores 32GB P440AR 4xRJ45
$309.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell R630 Server 2x E5-2620 V4 2.1GHz =16 Cores 128GB DDR4 1x 960GB 2x 1G 2x 10G
$210.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
CTO Dell PowerEdge R630 Server, 2x Xeon E5-2680V4, 64GB- 512GB RAM, New SSDs
$361.33
Dell PowerEdge R430 1U Server 2x E5-2660 v3 2.6ghz 20Cores 32gb 4Trays H730 2PSU
$249.99