I boot knoppix via pxe. The first stages PXE gets a dhcp address almost instant. After the transfer of miniroot.gz, starting linux terminal server, ect, the udhcp version is shown and starts showing message on screen that states sending discover. At this point the nic does an down and back up link. This causes a great delay in the boot process. How can this be avoided. I configed switch Brocade to 1Gb-full-master with no success. Any ideas? Thanks greatly.
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
HPE 727263-003 BL460c G9 Raid BBWC Smartstorage Battery
$24.99
Dell R630 8SFF 2.6Ghz 20-Core 256GB H330 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$576.04
Dell R740XD2 26LFF 2.2Ghz 32-C 64GB H730P MINI RAID 2x10G SFP+ NIC 2x1100W Rails
$5550.08
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$86.99
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Lenovo 930-16i PCIe SAS RAID Controller FRU P/N: 01KN508 Tested Working
$149.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99