Which version of Knoppix do you use?
How do you boot the Linux kernel?
Hi I was wondering what scripts were used to load the second part of knoppix (after already getting in to the kernel). My problem is i am able to get to the kernel but knoppix for some odd reason cannot mount the ISO file in to the folder "mnt-system". I have managed to mount the required ISO files in to the correct folder but I don't know how to tell the kernel to continue with the booting process. Any insight in the matter would be greatly appreciated.
Which version of Knoppix do you use?
How do you boot the Linux kernel?
Im using 6.7 CD. I put the ISO on to my USB and adding it to my GRUB loader. I do notice that as soon as the kernel boots it begins to scan my hard disks and usb drive (for the ISO) so it can mount it on to "mnt-system". Unfortunately due to my current configuration I am unable to place the ISO in the root directory (it is in a directory "/ISO"). Would it be possible to ethier re-run the scanning script after i have manully mounted the ISO or order the kernel toi scan the "/ISO" directory on "sdd1" (my USB)?
What happens if you mount the ISO image file as a loopback device at the mount point /mnt-system and press the key combination CTRL D or issue exit in order to terminate the shell?
Knoppix 7 has a new cheatcode 'bootfrom' that helps using an ISO image file as boot medium.
Okay I have gotten it to work. My mistake was that i did not notice that there was a mounting script that runs before and then looks for the mounted files NOT the ISO. So I made another partion on my USB and copyed over all the compressed files on to my second partion and now I and running KNOPPIX right off my USB. Hope this helps someone. Thanks for your help.
Shmuel6,
Why did you want to use the ISO from USB? Seems like a total waste of energy to me. If you start from the CD/DVD, eventually run the ISO in a virtual machine or use, as Klaus2008 mentions, the bootfrom cheatcode (at least in Knx7), you can then use the built-in Knoppix-to-flash function. That will get you started correctly running from USB media.
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
Dell R630 8SFF 2.4Ghz 12-Core 128GB H330 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$430.04
Dell R630 8SFF 2.4Ghz 20-Core 128GB H730 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$455.04
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
NEW LSI MEGARAID SAS 9361-8i 12GB/s SAS + SATA RAID CONTROLLER CARD PCIe x8 3.0
$99.00
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 04Y5H1 High Profile
$17.99