Greetings, Karibu.
You might give /etc/rc.local a try.
Things here apply after all other initialization is over, allegedly.
Hi, I have a quick Question:
Which is the correct location to put a shell script in order to get it started at boot?
I tried /etc/init.d but it didn't work.
The script I want to start is lxdeDefaultScreenlayout for my dual monitor system, which was generated with 'exit
arandr'.
Last edited by Karibu; 09-10-2012 at 07:35 PM.
Greetings, Karibu.
You might give /etc/rc.local a try.
Things here apply after all other initialization is over, allegedly.
Greetings, Karibu!
The boot process of Knoppix consists of several steps like finding the Knoppix directory, building up of the union file system, detection of hardware components, starting the desktop environment. At all times there are means to run a shell script in addition to the usual ones delivered with Knoppix.
If you want to start a service you would use the /etc/rc.local configuration file. If you need to run a script at the end of /etc/init.d/knoppix-autoconfig you can create a file knoppix.sh in the KNOPPIX directory. If you want to run a shell script after the setup of the desktop environment you can put that script in the directory /usr/local/bin and create a suitable .desktop file in the directory /home/knoppix/.config/autostart. Configuration files for the X server are usually put in a subdirectory of /etc/X11.
Greetings, Klaus2008.
I'm going to frame Post #3 over my workplace.
Thanks for that jewel.
Thank you Klaus for the Info... It is a bit to high for me...
runing in the Terminal 'arandr' gives me a script which configures my two-monitor system.
I want this have executed automatically with each start/restart..#!/bin/sh
xrandr --output VGA-0 --mode 1920x1080 --pos 0x0 --rotate normal
--output DVI-0 --mode 1920x1080 --pos 1920x0 --rotate normal
I put the file in the locations
- /home/knoppix/.config/autostart
- /etc/X11/Xsession.d
- /usr/local/bin
but none worked. What do I have to do?
I think that you should create a small file /home/knoppix/.config/autostart/lxdeDefaultScreenlayout.desktop with the following content:The owner of the .desktop file should be knoppix.Code:[Desktop Entry] Name=lxdeDefaultScreenlayout Type=Application Exec=sudo /usr/local/bin/lxdeDefaultScreenlayout Terminal=false
There is a thread 'How to autorun a X program' where you can find a link to the 'Desktop Entry Specification'.
Issue SOLVED...
It works as expected...
Thank you Klaus for your outstanding support
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Dell R630 8SFF 2.4Ghz 12-Core 128GB H330 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$430.04
Dell R630 8SFF 2.4Ghz 20-Core 128GB H730 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$455.04
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
NEW LSI MEGARAID SAS 9361-8i 12GB/s SAS + SATA RAID CONTROLLER CARD PCIe x8 3.0
$99.00
Yottamaster 4Bay RAID RGB Hard Drive Enclosure Type B Fr 2.5'' 3.5" SATA HDD SSD
$149.99