Hi all,
Just bought a usb 3.0 card based on a NEC chipset at fry's and gave it a spin with knoppix 7.0 that came with linuxpromagazine.
(BYTECC USB 3.0 2 PORT PCIe HOST BUS ADAPTER - BT-PEU310 NEC uPD720200 Chipset for $17.99)
I hooked up my Western Digital 2TB mybook, and was getting strange results: On the left usb 3.0 port I got 40MB/sec transfer rates, on the right usb 3.0 port I got the full 120MB/sec transfer rates. Also it was crashing something when I started plugging and unplugging the usb cable between the different usb ports.
I switched to knoppix 7.0.4 and all of the problems went away. Yay! Got full 120MB/sec transfer speeds on both ports.
I've done a read scan of the full 2TB multiple times on both ports and it looks good. md5sum is your friend for testing hard drives.
dd_rescue /dev/sdd /dev/stdout | md5sum
(be careful with dd, dd_rescue as with incorrect parameters you can erase your disks. They don't call it "disk destroyer" for nothing)
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00
10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module
$85.00
New Cisco w/ Green Hologram SFP-25G-SR-S 25G SFP28 SR 850nm 300m LC MMF Module
$69.99
New Cisco w/ Green Hologram SFP-10G-LR-S 10G SFP+ LR 1310nm 10km SMF LC Module
$34.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
Genuine Cisco GLC-TE 30-1475-01 V01 1000BASE-T SFP COPPER RJ-45 100M TRANSCEIVER
$11.90
NEW FS SFP-10G-T 10GBASE T SFP+ 30M Transceiver Module (Lot of 1)
$39.95
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
New Cisco w/ Green Hologram GLC-TE 1G SFP Copper RJ45 100m Module
$29.99
Genuine Avago 32GFC 850nm MMO FC SFP+ Optical Transceiver AFBR-57G5MZ-ELX
$29.95