-
Senior Member
registered user
Boot from Knoppix ISO in HDD using grub
I used the following code:
Code:
menuentry "Knoppix ISO" {
insmod part_msdos
insmod ext3
set root=(hd0,msdos2) #the partition where you've stored knoppix iso
loopback loop /KNOPPIX_V7.0.4DVD-2012-08-20-EN/KNOPPIX_V7.0.4DVD-2012-08-20-EN.iso
linux (loop)/boot/isolinux/linux boot=isolinux iso-scan/filename=/KNOPPIX noeject noprompt --
initrd (loop)/boot/isolinux/minirt.gz
}
everything works, then knoppix iteratively searchs KNOPPIX in /dev/sdax for a few times and lets go.
Where I am going wrong?
--------------------
formatted by mod
Last edited by Werner P. Schulz; 12-08-2012 at 05:05 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
Dell PowerEdge R7525 Server 24X2.5(8XNVME)+H745 2xEPYC 7302 CPU 128G RAM 2x2400W
$3350.00
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HP ProLiant DL360 G9 2x Xeon E5-2690 V3 24 Cores 2.6GHz P440ar 32GB DDR4
$119.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
PowerEdge R710 Rackmount Server 80GB RAM 2x XEON E5520 CPU 4.75TB
$200.00