-
Knoppix stopped entering X after installing vnc4server
Hello,
my knoppix was working well, I installed vnc4server, it also worked well. Today I started the machine and to my surprise I cannot enter runlevel 5, it gets stuck. For some time tries, i.e. goes blackscreen, and then back to console with message:
# The graphical subsystem could not be startet
or terminated unexpectedly.
Maybe your graphics adapter or monitor are not auto-configurable.
Please try to reboot and give some of the Knoppix-Cheatcodes
at the initial boot:-prompt, which match your graphics adapter.
Examples:
knoppix xmodule=radeon (or ati, nv, cirrus, ...)
knoppix xmodule=fbdev
knoppix xmodule=vesa
knoppix hsync=90 vsync=75
I don't remember doing much more that installing vnc...
I've looked around the network and didn't found any useful hints. Any ideas what my go wrong? Where to start checking?
-
We would need to know what version you're using, and how you are using it, at a minimum. Did you install it, and if so, where? E.g. hard drive, CD/DVD, flash stick, etc. Also, you say you installed vnc4server, but not where and how that was done. We'll be happy to help, we just need some data to work from...
Cheers!
Krishna
-
I managed to fix the problem! I found a tip somewhere to remove .Xauthority file. After that everything worked flawlessly.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
H261-Z61 2U 24SFF AMD Server 8x EPYC 7702 512-Cores 2048GB RAM 8x25G NIC 2x2200W
$13292.18
Dell PowerEdge R7525 Server 24X2.5(8XNVME)+H745 2xEPYC 7302 CPU 128G RAM 2x2400W
$3350.00
Genuine HP ProLiant MicroServer Gen8 Intel Pentium G2020T 2.5GHz 712318-001
$199.95
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
Supermicro Super Server Tower Xeon X7 32GB ram. UIO slot- NO HDD NO OS
$124.95
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
Supermicro E300-8D Xeon D-1518 2.20GHz Mini Server
$549.99
Genuine HP ProLiant MicroServer Gen8 without the part on the front w power cord
$185.92
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00