-
Knoppix stopped entering X after installing vnc4server
Hello,
my knoppix was working well, I installed vnc4server, it also worked well. Today I started the machine and to my surprise I cannot enter runlevel 5, it gets stuck. For some time tries, i.e. goes blackscreen, and then back to console with message:
# The graphical subsystem could not be startet
or terminated unexpectedly.
Maybe your graphics adapter or monitor are not auto-configurable.
Please try to reboot and give some of the Knoppix-Cheatcodes
at the initial boot:-prompt, which match your graphics adapter.
Examples:
knoppix xmodule=radeon (or ati, nv, cirrus, ...)
knoppix xmodule=fbdev
knoppix xmodule=vesa
knoppix hsync=90 vsync=75
I don't remember doing much more that installing vnc...
I've looked around the network and didn't found any useful hints. Any ideas what my go wrong? Where to start checking?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$28.66
Seagate Exos X14 12TB SATA6Gb/s 7200RPM 3.5" Enterprise Hard Drive ST12000NM0558
$119.95
Seagate Exos X22 ST22000NM001E 22TB 512E SATA 6Gb/s 3.5" Enterprise Hard Drive
$311.99
Western Digital Gold Enterprise 4TB,7200 RPM Internal Hard Disk Drive WD4002FYYZ
$39.95
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$89.99
HP 4TB 3.5" 12Gb/s 7.2K SAS Hard Drive P/N: 793674-001 / 803634-001 / 695597-004
$13.12
Seagate Exos X14 12TB SATA6Gb/s 7200RPM 3.5" Enterprise Hard Drive ST12000NM0558
$104.95
1TB HDD/SSD 2.5" SATA Hard Drive for Laptop with Win 10/Win 11 Pro Pre-installed
$18.99
Western Digital 4TB Internal 7.2KRPM 3.5" (WD4000FYYZ) SATA Hard Drive ZERO HOUR
$69.99
Seagate Enterprise Capacity 8TB 7200 RPM Internal Hard Drive ST8000NM0045
$99.99