-
2 months and still no Knoppix 7.1 community distro... any ETA to share with us ?
-
Senior Member
registered user
Greetings, Gilles.
Klaus K is still struggling with a PCManFM problem in CeBIT 7.1.
If you have a solution for that, it would help get the Community Version out.
As I understand it, a mouse-over of a desktop icon ( in the CeBIT version)
causes an automatic click to open unless a double-click to open option is in force.
Werner or Klaus2008 may be able to explain this more clearly, I don't have
the CeBIT version, myself.
Regards.
-
Hi Utu,
I just tried Knoppix CeBIT 7.1 as a VMware guest (booting from the iso without customization)
and I can see that just moving the mouse over the "KNOPPIX" folder (without any button pressed)
does actually select that folder as if the button was pressed before moving over that desktop icon.
But it does not open the folder content (as if you would click on that desktop folder icon).
As expected a click on the folder icon does open the folder content.
Not sure why this is a big deal anyway.
In my slightly customized setup I disabled the single click and the problem is gone:
in the [config] section of the file: ~knoppix/.config/libfm/libfm.conf
change "single_click=1" to "single_click=0"
I understand that for some user the need for a double click may be a problem
but this can always be improved/solved in a later release and my guess is that
a lot of Knoppix users would be very happy to see a Knoppix 7.1 Community version
released sooner than later (even with a double click as a default) since not
everybody can have access to the Knoppix CeBIT 7.1version.
My two cents,
Gilles
-
I don't believe PCManFM's problem is the only problem within V7.1. If I look for possibly problems, I'll get this list. In comparison, within V7.0.5 are no problems reported by kn-what.sh.
Code:
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err:
||/ Name Version
hi artwiz-cursor 1:1.3-2knoppix1
hi egoboo 1:2.8.1-2knoppix1
hi egoboo-data 1:2.8.1-2knoppix1
hi gnome-orca 3.4.2-2
pi kdebase-workspace 4:4.8.4-6
hi libfm-data 1.1.0-1knoppix
hi libfm-dev 1.1.0-1knoppix
hi libfm-gtk-bin 1.1.0-1knoppix
hi libfm-gtk1 1.1.0-1knoppix
hi libfm1 1.1.0-1knoppix
pi libkutils4 4:4.8.4-4
pi libnspr4-0d:i386 2:4.9.4-2
pi libnss3-1d:i386 2:3.13.6-2
hi lxsession 0.4.6.1-4knoppix
pi module-init-tools 9-2
hi ntfs-3g 2:2012.1.15AR.8-2knoppix0
hi pcmanfm 1.1.0-1knoppix
pi python-aptdaemon-gtk 0.45-1
pi python-gobject 3.2.2-1
hi speech-dispatcher 0.7.1-6.2
hi testdisk 1:6.14-0knoppix1
hi wpasupplicant-gnutls 1.0-4knoppix2
hi xfonts-artwiz 1:1.3-2knoppix1
-
Senior Member
registered user
Originally Posted by
Werner P. Schulz
I don't believe PCManFM's problem is the only problem within V7.1. If I look for possibly problems, I'll get this list. In comparison, within V7.0.5 are no problems reported by kn-what.sh....
This list contains many packages in common with 7.0.5, which does not have this problem.
Also, 'pi' and 'hi' mean what?
-
Some packages have the same version, some are newer.
hi => Hold/Inst
pi => Purge/Inst
Code:
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err:
||/ Name Version
Knoppix V7.1 Knoppix V7.0.5
hi artwiz-cursor 1:1.3-2knoppix1 | artwiz-cursor 1:1.3-2knoppix1
hi egoboo 1:2.8.1-2knoppix1 | egoboo 1:2.8.1-2knoppix1
hi egoboo-data 1:2.8.1-2knoppix1 | egoboo-data 1:2.8.1-2knoppix1
hi gnome-orca 3.4.2-2 > gnome-orca 2.30.2-2
pi kdebase-workspace 4:4.8.4-6 > kde-workspace 4:4.7.4-2
hi libfm-data 1.1.0-1knoppix | libfm-data 1.1.0-1knoppix
hi libfm-dev 1.1.0-1knoppix | libfm-dev 1.1.0-1knoppix
hi libfm-gtk-bin 1.1.0-1knoppix | libfm-gtk-bin 1.1.0-1knoppix
hi libfm-gtk1 1.1.0-1knoppix | libfm-gtk1 1.1.0-1knoppix
hi libfm1 1.1.0-1knoppix | libfm1 1.1.0-1knoppix
pi libkutils4 4:4.8.4-4 > libkutils4 4:4.8.4-3
pi libnspr4-0d:i386 2:4.9.4-2 > libnspr4-0d 2:4.9.3-1
pi libnss3-1d:i386 2:3.13.6-2 > libnss3-1d 2:3.13.5-1
hi lxsession 0.4.6.1-4knoppix | lxsession 0.4.6.1-4knoppix
pi module-init-tools 9-2 > module-init-tools 8-2
hi ntfs-3g 2:2012.1.15AR.8-2knoppix0 > ntfs-3g 1:2012.1.15AR.5-2knoppix
hi pcmanfm 1.1.0-1knoppix | pcmanfm 1.1.0-1knoppix
pi python-aptdaemon-gtk 0.45-1 | python-aptdaemon-gtk 0.45-1
pi python-gobject 3.2.2-1 | python-gobject 3.2.2-1
hi speech-dispatcher 0.7.1-6.2 > speech-dispatcher 0.7.1-6.1
hi testdisk 1:6.14-0knoppix1 | testdisk 1:6.14-0knoppix1
hi wpasupplicant-gnutls 1.0-4knoppix2 | wpasupplicant-gnutls 1.0-4knoppix2
hi xfonts-artwiz 1:1.3-2knoppix1 | xfonts-artwiz 1:1.3-2knoppix1
-
If I run aptitude for the first time within Knoppix V7.1, I'll get this screen; in comparison there are no error messages from aptitude within V7.0.5
aptitude_71..png
-
Senior Member
registered user
Greetings, Werner.
What happens if you try to upgrade the 17 broken packages from
"unstable" manually using
sudo apt-get install -t unstable packagename?
-
In the next days Debian testing will become stable and all within '/etc/apt/sources.lst' must be changed. Therefore at present it makes little sense to look what happens using "-t testing" versus "-t unstable". I believe, KK is also waiting until Debian Wheezy will be "stable".
-
Senior Member
registered user
Originally Posted by
Werner P. Schulz
I believe, KK is also waiting until Debian Wheezy will be "stable".
I think you are right, and this may change Aptitude's assessment.
Broken packages is not a popular theory with _some_ developers.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Dell R630 8SFF 2.4Ghz 12-Core 128GB H330 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$430.04
Dell R630 8SFF 2.4Ghz 20-Core 128GB H730 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$455.04
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
NEW LSI MEGARAID SAS 9361-8i 12GB/s SAS + SATA RAID CONTROLLER CARD PCIe x8 3.0
$99.00
Yottamaster 4Bay RAID RGB Hard Drive Enclosure Type B Fr 2.5'' 3.5" SATA HDD SSD
$149.99