-
Microknoppix and USB Drivers on PowerPC - How To?
Hi! I'm working on a system which has an embedded PowerPC and Microknoppix (kernel version 2.6.19).
I need to get it to work with a USB device which has some kind of USB-Serial converter chip in it. The manufacturer's website gives the following instructions for Linux:
To load the generic USBSerial driver, enter the following string:
modprobe usbserial vendor=0x213e product=0x000a
However, I get the following error:
FATAL: Could not load /lib/modules/2.6.19/modules.dep: No such file or directory
Here is the listing of /lib/modules:
-rw-r--r-- 1 root root 12415 Sep 7 2007 ccduevent.ko
-rw-r--r-- 1 500 ccdu 23410 Nov 14 2008 i2c-core.ko
-rw-r--r-- 1 500 ccdu 10107 Nov 14 2008 i2c-dev.ko
-rw-r--r-- 1 500 ccdu 7932 Nov 14 2008 i2c-mpc.ko
-rw-r--r-- 1 root root 107572 Jun 29 2007 jffs2.ko
-rw-r--r-- 1 root root 6290 Jun 4 2007 wdog83xx.ko
-rw-r--r-- 1 root root 20852 Jun 29 2007 zlib_deflate.ko
-rw-r--r-- 1 root root 16092 Jun 29 2007 zlib_inflate.ko
So I guess that modules.dep should tell modprobe what it needs and where to find it, and that it has been left out of this Microknoppix version to save space. Am I on the right track?
Should I be able to download and install a modules.dep? Is it platform-dependent?
Or, should I be going about this another way?
The USB device should create a virtual com port, which (in theory) I can open from my C program like a normal serial port. If that works I will be very happy as i can get back to writing code (the real work!).
All I know about the USB part of the device is that it is "vendor=0x213e product=0x000a". However, I can't find any info on this vendor or product with Google.
Any suggestions, including suggestions of any other forums where this question might be more appropriate, would be greatly appreciated!
Thanks.
-
Senior Member
registered user
Should I be able to download and install a modules.dep? Is it platform-dependent?
Look at http://linux.die.net/man/8/depmod and try
Code:
sudo depmod -a 2.6.19
-
Thanks! I had to create /lib/modules/2.6.19/ but then it worked. However, now when I run modprobe I get the error:
FATAL: Module usbserial not found.
I guess I have to face the fact that this kernel doesn't have USB-Serial support built in. I've been trying to compile a module as I have some source code for a driver for the specific device, but cross-platform kernel module compilation is a bit beyond me...
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Samsung Galaxy Tab A8 10.5" SM-X200 128GB Wifi Only Tablet Open Box
$149.99
Case for Samsung Galaxy Tab A9+ 5G/A9 Plus 11"/A9 8.7"Shockproof Stand Full Body
$17.99
EXCELLENT SAMSUNG GALAXY TAB 4 10.1in SM-T537V 16GB WIFI VERIZON ANDROID TABLET
$44.99
Samsung S Pen for Galaxy Tab S7/S8 Series - Mystic Black
$20.00
Genuine Samsung Book Cover Keyboard for 14.6" Galaxy Tab S8 Ultra | S8 Ultra 5G
$89.99
1 PCS Samsung PM9B1 512GB PCle 4.0 NVMe SSD, MZVL45120
$29.99
Samsung Galaxy Tab A9 (X110) 64GB 4GB RAM International Version (New)
$129.99
Samsung USB 3.1 Flash Drive Bar Plus 256gb TITAN Gray
$24.10
Samsung 22 In LED-backlit LCD monitor, S22E450D
$45.00
1.92TB SSD SATA 2.5 SAMSUNG MZ-7LM1T90 PM863 MZ7LM1T9HCJM Tested 93%+
$46.03