-
Senior Member
registered user
Knoppix 7.2 breaks PXE boot
I have successfully PXE booted Knoppix 7.0.5 using pxelinux with the following relevant settings:
Code:
kernel knoppix/linux
append nfsdir=192.168.1.200:/knoppix nodhcp lang=en apm=power-off ramdisk_size=100000 init=/etc/init nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime BOOT_IMAGE=KNOPPIX
initrd knoppix/miniroot.gz
After upgrading the copy of Knoppix on my NFS server to 7.2 and upgrading the files "linux" and miniroot.gz (now called minirt.gz) to the new versions, PXE boot now errors out. My pxelinux config is the same except that I have upgraded the last line to reflect the new file minirt.gz.
I get the following error message:
Code:
/init: cd: line 1: can't cd to /modules/net
Loading network device module(s)
/init: cd: line 1: can't cd to /modules/net
sh: can't access tty; job control turned off
/ #
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
DELL PowerEdge R630 8SFF Server 2x E5-2690v4 2.6GHz =28 Cores 128GB H730 4xRJ45
$428.00
Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 28-Cores / 128gb / H330 / 2x 1TB
$279.99
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$273.00
Dell Poweredge R730xd 3.5 2x E5-2690 v3 2.6ghz 64gb H730 14x Trays 2x 1100w
$489.99
Dell PowerEdge R420 Dual Intel Xeon E5-2440 v2 @1.90GHz 32GB RAM No HDD H710
$74.50
Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD
$139.99
Dell Poweredge R210 II Server Xeon E3-1220 v2 3.1ghz Quad Core / NoRam / 1x Tray
$69.99
Dell PowerEdge R620 Server - 256GB RAM, 2x8cCPU, 120Gb SSD/3x900Gb SAS, Proxmox
$320.00
Dell PowerEdge R330 Xeon E3-1220 v5 3.0GHz 32gb H330 2x 3.5" Trays SVR 2012
$189.99
DELL PowerEdge R630 8SFF Server 2x E5-2650v4 2.2GHz =24 Cores 32GB H730 4xRJ45
$242.00