-
Senior Member
registered user
Knoppix 7.2 breaks PXE boot
I have successfully PXE booted Knoppix 7.0.5 using pxelinux with the following relevant settings:
Code:
kernel knoppix/linux
append nfsdir=192.168.1.200:/knoppix nodhcp lang=en apm=power-off ramdisk_size=100000 init=/etc/init nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime BOOT_IMAGE=KNOPPIX
initrd knoppix/miniroot.gz
After upgrading the copy of Knoppix on my NFS server to 7.2 and upgrading the files "linux" and miniroot.gz (now called minirt.gz) to the new versions, PXE boot now errors out. My pxelinux config is the same except that I have upgraded the last line to reflect the new file minirt.gz.
I get the following error message:
Code:
/init: cd: line 1: can't cd to /modules/net
Loading network device module(s)
/init: cd: line 1: can't cd to /modules/net
sh: can't access tty; job control turned off
/ #
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell Poweredge XC730xd 3.5 2x E5-2690 v3 2.6ghz 64gb JBOD 12x Trays 2x1100w
$239.99
CTO Dell PowerEdge R630 Server, 2x Xeon E5-2620V4, 64GB- 512GB RAM, 480GB SSDs
$246.67
DELL POWEREDGE T430 SERVER W/ DUAL XEON E5-2609 CPU & 16GB MEMORY
$329.00
Dell R730 8B LFF 2x 2.40GHz 14C Intel Xeon E5-2680 v4 32GB RAM 2x 3TB HDD HBA330
$299.99
Dell Poweredge R620 8-Bay CTO Pick your CPU & RAM Config | H710 Raid | 2x PSU
$209.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
Dell Poweredge R640 8 SFF Server No HDDs/ CPUs/ RAMs/ Cards/Fan/PSU
$419.99