Hi,
I had the same problem with my Latitude.
If you don't need PCMCIA then you can disable it on the boot prompt. Just type "knoppix nopcmcia". It is the "nopcmcia" boot option that does it.
Regards
Daniel
I just received a new dell inspiron 8200 and tried to boot up to knoppix. Every time it boots it locks up on loading pcmcia.
I downloaded the latest version of Knoppix recently thinking that the new card services would fix the issue, but it still happens.
I can boot up the laptop to knoppix by typing in "knoppix nopcmcia" but I really would like to be able to use my orinoco gold card.
Has anyone else has this problem and know of a solution.
inspiron 8200
P4 1.8GHz
256MB RAM
30GIG HDD
I just got it about 2 weeks ago, so it has the latest hardware in it.
Thanks!
Hi,
I had the same problem with my Latitude.
If you don't need PCMCIA then you can disable it on the boot prompt. Just type "knoppix nopcmcia". It is the "nopcmcia" boot option that does it.
Regards
Daniel
I really would like to use the pcmcia slots because i have a wireless network card.
My builtin network card works but it would still be nice to use the wifi.
I'm having the same prob. Check out http://linux-wlan.com/ and http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/ for linux wireless drivers. I think you have to load a driver for your card and slot to be recognized. Unfortunately with Knoppix, that might mean installing on your hard drive with the command knoppix-hdinstall from the terminal window.
To fix the Dell lockup on pcmcia you have to remaster the cd. Follow the guides that you can find on remastering, but before creating the ISO image, edit the /KNOPPIX/etc/pcmcia/config.opts and look for the line that says:
include port 0x100-0x4ff, etc etc and take out the 2 entries that say port 0x800-0x80f and port 0x816-0x8ff so that the line now reads:
include port 0x100-0x4ff, port 0xc00-0xcff
remaster the cd and it should work just fine.
or you could just start knoppix up with the nopcmcia option then copy the config.opts from /KNOPPIX/etc/pcmcia/config.opts to /etc/pcmcia/config.opts, edit the file making the changes, then run /etc/init.d/pcmcia start
Thanks for the help. I'll try this out first thing in the morning when i get to work and see how it works!
Thanks again.
I did the thing Gunz suggested and it worked to load my wireless card. However I can't get it to find/connect/configure to my network via wireless card. By curiousity I tried loading Knoppix without an ethernet cable plugged in and plugged it in after Knoppix had loaded and that also did not load/connect/configure my network so I'm guessing when Knoppix is booting it loads and configs your network. What I'm wondering is how do I do this once I'm in Knoppix?
The latest version of knoppix that came out took care of that nasty dell notebook problem.
No more workarounds!
Thanks to whoever suggested that it should be added that to the CD, and keep up the good work!
SanDisk 128GB Ultra Flair USB 3.0 Flash Drive - SDCZ73-128G-G46
$12.99
SanDisk 128GB Extreme PRO USB 3.2 Solid State Flash Drive - SDCZ880-128G-A46
$36.99
SanDisk 32GB Ultra Dual Drive USB Type-C, USB 3.1 Flash Drive - SDDDC2-032G-G46
$10.99
SanDisk 512GB Ultra Drive Dual Go USB Type-C Flash Drive Green SDDDC3-512G-G46G
$49.99
Sandisk 16GB 32GB 64GB 128GB Cruzer Blade Flash Drive Memory Stick USB Lot Pack
$4.99
New TESLA OEM Model S,3,X,Y USB Flash Drive for Dashcam & Sentry Mode 128GB
$18.99
Lenovo USB 16TB 3.0 USB Flash Drive Thumb Disk Silver Transfer Metal Memory
$24.99
Mechanical Style Flash Drive USB 3.0 High Speed 16TB Large Capacity Waterproof
$8.37
USB Flash Drive Memory Stick Pendrive Thumb Drive 4GB, 8GB, 32GB, 64GB 128GB LOT
$249.37
Lot USB Flash Drive Memory Stick Pendrive Thumb Drive 2GB,4GB, 8G, 32G, 64G 128G
$414.85