I like to use the cheatcode tohd to put the knoppix dvd onto the hard drive. However, I didn't use mkimage when I ran it initially. (I don't know if that would make a difference)
For some reason, using the cheatcode "mkimage" later was ignored.
My boot command line was something like this:
knoppix64 tohd=/dev/sda1
and it dutifully created the KNOPPIX directory on /dev/sda1 but I didn't get a persistent storage file.
One thing that's interesting is that when knoppix boots it automagically scans the drives and finds that KNOPPIX directory even if I don't specify the cheatcode "fromhd=/dev/sda1".
So if you want to create that knoppix-data.img by hand just launch a terminal after booting into your KNOPPIX and
dd if=/dev/zero of=/mnt-system/KNOPPIX/knoppix-data.img bs=1024K count=4000
This will make a 4000MB persistent file (you can make larger if you like) The hard drive that I'm using is formatted FAT32 so my limit is 4GB. Using other formats will have no such restriction.
(And as always, exercise care with dd since you can easily clobber your drives if you enter the wrong parameters. They don't call it disk destroyer for nothing. I've done it once or twice by entering parameters without thinking.)
Then you need to format it
mkfs.ext2 /mnt-system/KNOPPIX/knoppix-data.img
(You may need to use a -F parameter to "force" it to use a regular file, since it normally expects block devices)
(For some reason I thought it had to be reiserfs, but ext2 seems to work. I kept formatting it as reiser and it wouldn't use it)
Also, if you don't like the messages about KNOPPIX-DATA when you boot, there's a file called "knoppix-data.inf" that you can rename. It will mount a persistent PARTITION, and since we're using a persistent FILE, we don't really need it. The error messages don't hurt anything, but if you rename that file, you won't see them anymore. You can always rename it back to the original name.
mv /mnt-system/KNOPPIX/knoppix-data.inf /mnt-system/KNOPPIX/was-knoppix-data.inf
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2630V3 | 32GB | P244BR | 2x300GB 15K
$299.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Cisco UCS B200 M4 Blade Server, 2x2660 V3, 40GbE, No Ram No HDD
$35.95
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M620 Blade Server
$39.99
HP ProLiant BL460c Gen9 Blade 2x E5-2680v3 2.5GHz =24 Cores 256GB P246 650FLB
$430.00