-
Knoppix issue with large USB connected hard drives?
I've encountered a problem with Knoppix which may be due to my use of a 2 tb USB hard drive. I would appreciate any suggestions.
Background I have been backing up my desktop and my wife's desktop WINXP computers using portable USB hard drives and Knoppix file utilities. Things have been working well. USB port is USB 2, and some of the 500 gb and 1 tb drives are USB 2 and some USB 3. File system is NTFS on the source computers and the target drives. I use "Copy" on the source files and "Paste" on the target drives. Transfer takes about four hours for 80 to 90 gb.
I got a couple of larger drives (2 tb) and cannot get the backups to record. The drives are recognized and the backup starts, but fails with no error message after about two or three folders. Problem is the same on either drive (Seagate expansion portable drive). I have tried partitioning the 2 tb drives to 2 one tb partitions to no avail. Same result.
I have tried using the 2 tb drives directly on windows and have copied large volumes of files directly, so it appears the drives are not at fault.
I would like to continue to use Knoppix to do the transfer, however, because it does not have the problem with long windows filenames nor distress at copying windows system files .
Request Does anybody have any idea of what might account for this difference, or any tests I might run to help diagnose what may be causing the difference?
Thanks!
Rich113
-
Senior Member
registered user
Originally Posted by
Rich113
I've encountered a problem with Knoppix which may be due to my use of a 2 tb USB hard drive. I would appreciate any suggestions.
I have tried using the 2 tb drives directly on windows and have copied large volumes of files directly, so it appears the drives are not at fault.
Request Does anybody have any idea of what might account for this difference, or any tests I might run to help diagnose what may be causing the difference?
Thanks!
Rich113
FWIW, Knoppix 7.4.2 is basically a 32-bit system, although it does have a 64-bit kernel option.
This might affect some things done at the terabyte level of some operations, I might think.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco GLC-FE-100FX-RGD 100BASE-FX SFP Transceiver Module
$17.99
Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module
$24.99
Cisco Meraki MA-SFP-10GB-SR 10G SFP+ SR 850nm 300m LC MMF
$29.99
CISCO SFP GLC-GE-100FX 10-2019-02 100Base-FX SFP GBIC Transceiver Module 1pcs
$52.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
Genuine Cisco SFP-10G-SR Transceiver Module (10-2415-03)
$5.85
New HP HPE Aruba J9150D 10G SFP+ LC SR 850nm 300m MMF XCVR Transceiver Module
$49.99
10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module
$85.00