-
USB 2.0 Support?
I've just downloaded knoppix build 2003-01-01
It booted fine and detected all my USB 2.0 peripherals (harddrive, CD-R/RW, hub, pcmcia host controller) but they've come up only at USB 1.1 speeds.
Does anyone know how I can make it run at the full USB 2.0 speed?
The harddrive is so slow at 12 Mbps!
Thanks
-
Senior Member
registered user
Re: USB 2.0 Support?
' modprobe ehci-hcd '
From /usr/src/linux-2.4.20-xfs/Documentation/usb/ehci.txt
[[
The EHCI driver is used to talk to high speed USB 2.0 devices using
USB 2.0-capable host controller hardware. The USB 2.0 standard is
compatible with the USB 1.1 standard. It defines three transfer speeds:
- "High Speed" 480 Mbit/sec (60 MByte/sec)
- "Full Speed" 12 Mbit/sec (1.5 MByte/sec)
- "Low Speed" 1.5 Mbit/sec
USB 1.1 only addressed full speed and low speed. High speed devices
can be used on USB 1.1 systems, but they slow down to USB 1.1 speeds.
USB 1.1 devices may also be used on USB 2.0 systems. When plugged
into an EHCI controller, they are given to a USB 1.1 "companion"
controller, which is a OHCI or UHCI controller as normally used with
such devices. When USB 1.1 devices plug into USB 2.0 hubs, they
interact with the EHCI controller through a "Transaction Translator"
(TT) in the hub, which turns low or full speed transactions into
high speed "split transactions" that don't waste transfer bandwidth.
At this writing, this driver has been seen to work with implementations
of EHCI from (in alphabetical order): Intel, NEC, Philips, and VIA.
]]
Originally Posted by
Tom
I've just downloaded knoppix build 2003-01-01
It booted fine and detected all my USB 2.0 peripherals (harddrive, CD-R/RW, hub, pcmcia host controller) but they've come up only at USB 1.1 speeds.
Does anyone know how I can make it run at the full USB 2.0 speed?
The harddrive is so slow at 12 Mbps!
Thanks
Similar Threads
-
By alexjenx in forum Hardware & Booting
Replies: 1
Last Post: 05-27-2004, 01:08 AM
-
By langhaarrocker in forum Customising & Remastering
Replies: 2
Last Post: 05-22-2004, 07:45 PM
-
By dork in forum General Support
Replies: 0
Last Post: 05-05-2004, 06:12 PM
-
By baldyeti in forum The Lounge
Replies: 3
Last Post: 11-28-2003, 11:18 PM
-
By ranch137 in forum General Support
Replies: 2
Last Post: 04-16-2003, 06:08 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco Nexus 48-Port 10G SFP+ Switch N9K-9396PX w/ 9K-M12PQ 12-Port 40G QSFP
$419.99
Lot of 10pcs Brocade 57-1000012-01 8Gbps SWL 850nm SFP+ Optical Transceivers
$19.00
Cisco GLC-FE-100FX-RGD 100BASE-FX SFP Transceiver Module
$17.99
Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module
$24.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
Genuine Cisco SFP-10G-SR Transceiver Module (10-2415-03)
$5.85
New Cisco w/ Hologram SFP-10/25G-CSR-S 10/25GBASE-CSR SFP28 Transceiver Module
$69.99
New HP HPE Aruba J9150D 10G SFP+ LC SR 850nm 300m MMF XCVR Transceiver Module
$49.99