-
setting usb
hi all
im relitivly new to linux/knoppix
what im trying to do is set a usb port to 115200 8n1
i think ive got so far ,just need a push to the finish line
in terminal i type minicom -s
but cant see anything about usb
but do see 8n1
forgive my ignorance,
and i dont see ttyusb in /dev/ttyusb
can anybody push me in the right direction
cheers
-
Hi, there:
Maybe you could try to use the following commands to find out the device name of the attached USB-RS232 converter.
The output of dmesg for my converter (enumerated as ttyUSB0) is as follows,
Code:
--- snip ---
[ 5490.114598] usb 3-1: new full-speed USB device number 2 using xhci_hcd
[ 5490.128896] usb 3-1: New USB device found, idVendor=067b, idProduct=2303
[ 5490.128904] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5490.128909] usb 3-1: Product: USB-Serial Controller D
[ 5490.128913] usb 3-1: Manufacturer: Prolific Technology Inc.
[ 5490.156854] usbcore: registered new interface driver usbserial
[ 5490.156871] usbcore: registered new interface driver usbserial_generic
[ 5490.156882] usbserial: USB Serial support registered for generic
[ 5490.158480] usbcore: registered new interface driver pl2303
[ 5490.158489] usbserial: USB Serial support registered for pl2303
[ 5490.158506] pl2303 3-1:1.0: pl2303 converter detected
[ 5490.159128] usb 3-1: pl2303 converter now attached to ttyUSB0
Hope this trivial info helps a bit...
ATB,
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$40.12
Juniper Networks EX2300-C 12-Port 2XSFP Uplinks PoE+ Switch P/N: EX2300-C-12P
$299.99
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper Networks EX4300-48T 48 Port Gigabit 4 QSFP 40G 2xPSU AFO Network Switch
$89.00
Juniper Networks EX3300-24P | 24 Port Gigabit Network Switch w/ Power cord
$53.99
Juniper EX3400-48P 48-Ports PoE+ 4x SFP+ and 2x QSFP+ Managed Switch Tested
$205.00
Juniper EX4600-40F-AFI 24 SFP+/SFP Ports 4 QSFP+ Ports Dual AC Switch
$999.00
JUNIPER EX3300-48T 48 PORT SWITCH TESTED & RESET w/ Rack Ears
$49.99
New Factory Sealed Juniper EX2300-48P Networks 48-Port Managed Ethernet Sealed
$499.00
Juniper Networks EX3300-48T 48-Port PoE+ Gigabit Ethernet Switch 4x SFP+ TESTED
$99.99