-
Senior Member
registered user
A built-in wifi scanning command you can add to Knoppix
.
If you would like to know what the wifi environment looks like where you are,
here's a little command-line way to display who's on which channel and how strong
they are relative to your own wifi.
You can easily try this out _temporarily_ by typing in the following line into
a Knoppix lxterminal:
Code:
alias wifi.scan='nmcli -p dev wifi list'
And, <enter>, of course. Then when you <enter> 'wifi.scan',
what you get may look like the following if you have a lot of yuppies with Ipads
and Kindles and Window computers and wireless printers in your neighborhood:
Code:
====================================================================================
Wi-Fi scan list (wlan0)
====================================================================================
* SSID MODE CHAN RATE SIGNAL BARS SECURITY
------------------------------------------------------------------------------------
WARnet Infra 11 54 Mbit/s 25 ▂___ WPA1 WPA2
-- Infra 6 54 Mbit/s 24 ▂___ WPA2
xfinitywifi Infra 6 54 Mbit/s 25 ▂___ --
LivingBrook Infra 6 54 Mbit/s 25 ▂___ WPA2
HOME-B0C2 Infra 6 54 Mbit/s 27 ▂___ WPA1 WPA2
LivingBrook-Guest Infra 6 54 Mbit/s 27 ▂___ --
-- Infra 6 54 Mbit/s 22 ▂___ WPA1 WPA2
xfinitywifi Infra 6 54 Mbit/s 20 ▂___ --
walters Infra 6 54 Mbit/s 19 ▂___ WPA1 WPA2
H89L2 Infra 6 54 Mbit/s 19 ▂___ WPA2
WARnet Infra 1 54 Mbit/s 25 ▂___ WPA1 WPA2
* MyWiFi Infra 6 54 Mbit/s 62 ▂▄▆_ WPA2
FiOS-9IX5R Infra 11 54 Mbit/s 20 ▂___ WPA2
FiOS-JHVGZ Infra 1 54 Mbit/s 25 ▂___ WPA2
FiOS-E9IHZ Infra 11 54 Mbit/s 17 ▂___ WPA2
HP-Print-57-Officejet Pro 8600 Infra 11 54 Mbit/s 20 ▂___ --
STRIPES Infra 11 54 Mbit/s 25 ▂___ WPA1 WPA2
snarfle Infra 11 54 Mbit/s 19 ▂___ WPA2
Basement Infra 11 54 Mbit/s 20 ▂___ WPA1 WPA2
87CX5 Infra 3 54 Mbit/s 22 ▂___ WEP
I add the one line, wifi.scan='nmcli -p dev wifi list', to my executable .bashrc
file to make wifi.scan a _permanent_ built-in capability.
If you don't already have a .bashrc file, then make one and do chmod +x
to make it executable. Try it, you may like it.
This all presumes your wifi supports scanning. My wifi is a $20 replacement unit,
so this capability my very well be present in other inexpensive computers like mine.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$179.99
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$55.45
Dell 7H4CN PERC H730P Raid Controller Mini Mono12GBPS 2GB NV Cache
$44.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 04Y5H1 High Profile
$13.99
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$99.99
Dell PERC V10 Z0017A SAS-SATA RAID Controller Card No Bracket N4C2D 5R10N
$52.97
Yottamaster 2 Bay USB 3.1 RAID Hard Drive Enclosure For 2.5" SATA HDD SSD UASP
$59.99