-
Senior Member
registered user
A built-in wifi scanning command you can add to Knoppix
.
If you would like to know what the wifi environment looks like where you are,
here's a little command-line way to display who's on which channel and how strong
they are relative to your own wifi.
You can easily try this out _temporarily_ by typing in the following line into
a Knoppix lxterminal:
Code:
alias wifi.scan='nmcli -p dev wifi list'
And, <enter>, of course. Then when you <enter> 'wifi.scan',
what you get may look like the following if you have a lot of yuppies with Ipads
and Kindles and Window computers and wireless printers in your neighborhood:
Code:
====================================================================================
Wi-Fi scan list (wlan0)
====================================================================================
* SSID MODE CHAN RATE SIGNAL BARS SECURITY
------------------------------------------------------------------------------------
WARnet Infra 11 54 Mbit/s 25 ▂___ WPA1 WPA2
-- Infra 6 54 Mbit/s 24 ▂___ WPA2
xfinitywifi Infra 6 54 Mbit/s 25 ▂___ --
LivingBrook Infra 6 54 Mbit/s 25 ▂___ WPA2
HOME-B0C2 Infra 6 54 Mbit/s 27 ▂___ WPA1 WPA2
LivingBrook-Guest Infra 6 54 Mbit/s 27 ▂___ --
-- Infra 6 54 Mbit/s 22 ▂___ WPA1 WPA2
xfinitywifi Infra 6 54 Mbit/s 20 ▂___ --
walters Infra 6 54 Mbit/s 19 ▂___ WPA1 WPA2
H89L2 Infra 6 54 Mbit/s 19 ▂___ WPA2
WARnet Infra 1 54 Mbit/s 25 ▂___ WPA1 WPA2
* MyWiFi Infra 6 54 Mbit/s 62 ▂▄▆_ WPA2
FiOS-9IX5R Infra 11 54 Mbit/s 20 ▂___ WPA2
FiOS-JHVGZ Infra 1 54 Mbit/s 25 ▂___ WPA2
FiOS-E9IHZ Infra 11 54 Mbit/s 17 ▂___ WPA2
HP-Print-57-Officejet Pro 8600 Infra 11 54 Mbit/s 20 ▂___ --
STRIPES Infra 11 54 Mbit/s 25 ▂___ WPA1 WPA2
snarfle Infra 11 54 Mbit/s 19 ▂___ WPA2
Basement Infra 11 54 Mbit/s 20 ▂___ WPA1 WPA2
87CX5 Infra 3 54 Mbit/s 22 ▂___ WEP
I add the one line, wifi.scan='nmcli -p dev wifi list', to my executable .bashrc
file to make wifi.scan a _permanent_ built-in capability.
If you don't already have a .bashrc file, then make one and do chmod +x
to make it executable. Try it, you may like it.
This all presumes your wifi supports scanning. My wifi is a $20 replacement unit,
so this capability my very well be present in other inexpensive computers like mine.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
Samsung 128GB (4x 32GB) M86B4G70DM0-CMA3 PC3-14900L 4Rx4 DDR3 ECC Reg Server Mem
$39.99
Samsung 256GB (16GBx16) 2Rx4 PC3L-10600R DDR3 ECC RDIMM Server Memory #99
$124.99
Samsung 16GB 2Rx4 PC4-2400 RDIMM DDR4-19200 ECC REG Registered Server Memory RAM
$20.99
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$9.64
Kingston KCP424SD8/16 16GB DDR4 2400Mhz Memory RAM
$15.00
M386A8K40BM2-CTD SAMSUNG 64GB (1X64GB) 4DRX4 PC4-2666V DDR4 SERVER MEMORY
$40.91
A-Tech 256GB 4x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$287.96