-
Senior Member
registered user
Using kvm to install Knoppix from ISO image to flash and HD, 7.6.1 example.
This is well known, but there are a few refinements that can be useful.
First, connect a USB stick, here it is identified, e.g.by fdisk -l as /dev/sdc. Go to the download directory and boot the ISO image with kvm, connecting the stick. (Here 1024KB memory is used, Knoppix can run with less.)
Code:
sudo kvm -cdrom KNOPPIX_V7.6.1DVD-2016-01-16-EN.iso -hdb /dev/sdc -m 1024 -boot d &
Boot Knoppix as a virtual machine, at the boot prompt write knoppix or knoppix64 + cheatcodes (keyboard=... for instance)
Inside the virtual machine, check that everything works fine. You should have internet connection, for example.
Use the 'Install KNOPPIX to flash disk' to install to the USB stick. Inside the VM, it is considered a hard drive and called /dev/sda, but from the size you can see that the correct drive is referenced. You may also create at persistent store at this time.
It takes some time, but after a while, you will get the message that the installation is complete.
Then it is time for powering down the ISO VM.
The preparation of the new Knoppix version can be continued by running the flash in kvm:
Code:
sudo kvm -hda /dev/sdc -m 1000 -boot d &
With persistent store in place, you can use synaptic, aptitude or apt-get to update or install packages. Don't forget to update the package listings!
It takes a bit more time to do installs in the kvm VM, but you can continue with your usual tasks on your pc in the meantime, so at least for me, this is a timesaver.
After having updated/installed the most important packages, you can shut down the VM, and copy the knoppix main directory from the USB stick to the pc. If there are already Knoppix directories there, give it a suitable name, like KNOPPIX761_0 (The _0 suffix is in case you, like me, will do remasterings.)
To boot the new version, you will have to modify the bootloader.
I use old, legacy GRUB, where this is very easy - but enough for now
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco w/ Green Hologram SFP-10/25G-LR-S 10/25GBASE-LR SFP28 Transceiver Module
$79.99
Cisco GLC-SX-MM 1000Base SX SFP Transceiver Module 30-1301-02
$5.99
Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module
$24.99
Cisco Meraki MA-SFP-10GB-SR 10G SFP+ SR 850nm 300m LC MMF
$29.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
Lot of 10 SFP-GB-GE-T Copper RJ45 10/100/1000Base-T 100m Transceiver Modules
$29.94
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00
10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module
$85.00
New Cisco w/ Green Hologram SFP-25G-SR-S 25G SFP28 SR 850nm 300m LC MMF Module
$69.99