Read the "help" part of the tool Knoppix HD Install.
Ok, I have the knoppix live 7.2.0 CD and using Gparted I have partitioned my main HDD to have 24Gb set aside for knoppix, formatted to ext3, in this partition I have created a smaller 3Gb swap partition. The total 24Gb partition is now mounted. When I try to install knoppix it just comes back with the same option of using GParted, it will not find the already formatted partition and install to it. I am new to knoppix and linux but am very familiar with PCs. I have been following instructions to the letter but knoppix just won't find the partition. I've looked on line for answers but I think my question is too specific, is there anyone out there who has had to overcome the same glitch?
Read the "help" part of the tool Knoppix HD Install.
Don't read all. Read only the help of Knoppix own tool...all the "help" parts..
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2630V3 | 32GB | P244BR | 2x300GB 15K
$299.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Cisco UCS B200 M4 Blade Server, 2x2660 V3, 40GbE, No Ram No HDD
$35.95
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge VRTX Rack Chassis 25-Bay 14.4TB HDD 2x M640 Blade 512GB RAM 2-Bay
$1979.99
Dell PowerEdge M620 Blade Server
$39.99
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99