To install 7.6.1 to USB you can use the ISO without burning it to DVD and then make your flash disk installation. Using the DD command you'll don't get the necessary change from Isolinux to Syslinux.
Am i missing something? I have just downloaded ver 7.6.1, checked it's MD5 & SHA1 sums, burned to a USB drive using the DD command (inc ending with a SYNC) and then tried to boot it ... failed!! Reformatted usb, repeated & still failed. So i found and booted an olded version of Knoppix and booted that. However, the "install knoppix to flash disk" only places the running system on the pen drive. There doesn't seem to be any option to install the newer iso image i downloaded to a usb drive ... or is there?
To install 7.6.1 to USB you can use the ISO without burning it to DVD and then make your flash disk installation. Using the DD command you'll don't get the necessary change from Isolinux to Syslinux.
Many thanks Werner. I did all the "without burning it to DVD " post you suggested and all seemed to be great (intel btw) until the final command which gave:Which gave:Code:$ kvm -m 512 -cdrom $PFAD/knx/remastered.isoAnd KVM does not exist in my distro's repos's ... I think my easiest option would be to simply burn a DVD ... Thanks again.Code:bash: kvm: command not found
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2699.99
HP Apollo 4530 G9 Blade 1x XL450 G9 2.60Ghz 24-Core 192GB 2x 240GB +3x 800GB SSD
$1405.05
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
727021-B21 HP ProLiant BL460c G9(Gen9) E5 10Gb FlexibleLOM CTO Blade Server
$66.00
IBM AC1 7870 BladeCenter Blade Server 2*Xeon X5570 2.93GHz 12GB SEE NOTES
$11.13
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
HP P17342-B21 M750 E2286M CTO BLADE SERVER
$329.95
DELL PowerEdge M630 Blade 2x E5-2620v4 2.1GHz =16 Cores 32GB H330 2x10Gb X520
$140.00