Why not read- and writable? I suppose you are using a "poor man's install.
First I boot knoppix as:
then I seeknoppix64 init 2 no3d fromhd="/dev/sdc5"
$ mount | grep mnt-system
/dev/sdc5 on /mnt-system type ext4 (rw,relatime,block_validity,delalloc,barrier,user_ xattr,acl)
$ blkid | grep sdc5
/dev/sdc5: LABEL="KNPX771" UUID="54e317fe-73cf-4b1c-8b1f-dfc9b708b68a" TYPE="ext2" PARTUUID="591ef660-03"
Why not read- and writable? I suppose you are using a "poor man's install.
OK, I (most probably wrongly) thought that partition used for a "poor man's install" would be read-only anyway
Say, you would like to define the regular user directory on the starting command prompt and you don't want anything to be ever written there
In fact, you would run knoppix without a hard drive at all and set up a user account after it started in case you would like to save anything. I would say a few files (access control + security) would be altered, just a few ... but the rest should be read-only
How do you do that?
Last edited by Albretch; 12-19-2016 at 08:03 PM.
In this case I wouldn't use a Live Linux as Knoppix with all his limitations. I would prefer for example Debian.
Fortinet FortiGate-40C Network Security Firewall
$37.50
Cisco ASA 5520 Adaptive Security Appliance
$42.56
PALO-ALTO NETWORKS PA-3050 SWITCH
$44.99
Ubiquiti Networks USG Unifi Security Gateway Router/Firewall
$29.95
SonicWall TZ300 Power Supply Wired Firewall Router Network Security Appliance
$14.50
OPNsense six-port Gigabit router/firewall on Lanner FW-7535 hardware
$69.00
Dell SonicWALL TZ300 | Firewall Security Appliance
$24.99
Fortinet Fortiwifi 60D FG-60D Security Appliance Firewall / VPN w/ AC Adapter
$34.97
Sonicwall TZ350 Network Firewall w/ AC Adapter
$99.99
Cisco ASA5505-SEC-BUN-K9 Firewall Security+ 25 VPN Peers 512MB ASA9.24 /W Power
$39.99