Have a look at this post
Problem is: I HD-installed knoppix/debian (running fine) and then some day my windows crashed and had to be reinstalled.
An of course it erased lilo and now I cannot access my knoppix/debian anymore. I tried to reinstall lilo, using the knoppix CD but no luck yet, it just doesn´t let me write the MBR even as root...
Any hints?
Have a look at this post
Other ideas you might try:
1) See if you can install LILO to a floppy to get you started (good idea to have a boot floppy anyways)
2) Boot to Windows and download LOADLIN.exe (have to search the net for it). After familiarizing yourself with it, use your Knoppix CD to copy your kernel image to your Windows disk. You should then be able to get to Linux from Windows.
Once you are back in your hard drive Linux installation, you can then run /sbin/lilo and it should re-write itself and all will be well.
Hope this helps,
Joe
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2630V3 | 32GB | P244BR | 2x300GB 15K
$299.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Cisco UCS B200 M4 Blade Server, 2x2660 V3, 40GbE, No Ram No HDD
$35.95
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M620 Blade Server
$39.99
HP ProLiant BL460c Gen9 Blade 2x E5-2680v3 2.5GHz =24 Cores 256GB P246 650FLB
$430.00