--What happens with boot: ' linux vga=normal '?
Originally Posted by fatso
Everything seems to go according to plan, until I get past the initial stages and the OS should be starting up....at which point all I get is a black screen and no cd activity at all.
All the detection stages seem fine too. I tried a myriad of "cheats" from the full knoppix version, different screen resolutions, etc......and....nothing.
BTW: I have the latest version of Damn Small Linux.
Anybody got any suggestions?
Here's my hardware setup:
P4 2.53 ghz
ASUS P4PE motherboard
512 mb RAM
onboard SoundMax
Radeon 7500 64mb video
linksys nic
SAMPO AlphaScan LC monitor
Yamaha 2200E CD-R/RW
All of the above hardware works fine on the full knoppix version. I'd LOVE to be able to carry this around with me in my pocket to show non-linux users how simple it can be....help me spread the gospel, folks!
--What happens with boot: ' linux vga=normal '?
Originally Posted by fatso
thanks for your reply!
I tried your suggestion, and got the same result.
btw: typing "linux vga=normal" gives the message "Cannot find kernel"
I have to use "knoppix vga=normal"
I suspect I'm doomed due to a lack of driver support for my video...it is a "Damn small linux", after all. Can't expect mega drivers in something so scaled-down.
...unless you have other ideas?
I have EXACTLY the same problem, I think it's something to so with the P4PE as I too have one.
Does it say something about not being able to setup PCI devices due to conflicts right at the start of bootup? Mine does.
I'll get back to you if I find a way of fixing it.
Yup...I get that PCI conflict message too.Originally Posted by Colsey2001
Likewise...if I find a solution, I'll let ya know.
--Try ' knoppix vga=normal pci=biosirq '.
Originally Posted by Colsey2001
It may also be due to the kernel version used in the ISO. The DSL team recently rolled back their kernel version to keep up with older hardware. This also means that newer hardware support vanished (with the exception of some extension applications). The last version that supported the newer hardware was DSL 2.1b, which used the 2.4.31 kernel. Whereas the current release uses the 2.4.26 kernel.
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
HPE 869102-001 Smart Array E208i-a SR Gen10 Storage Controller RAID SP: 871039
$129.99
Lot of 4 - Genuine Dell (62P9H) PERC H710 512MB Mini Blade 6Gbps SAS Raid
$49.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$86.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
Lenovo 930-16i PCIe SAS RAID Controller FRU P/N: 01KN508 Tested Working
$149.99
Dell 7H4CN PERC H730P Raid Controller Mini Mono12GBPS 2GB NV Cache
$44.99