-
knoppix-data.img corruption and fixing
I've noticed that if I use a persistent image file and for some reason it gets corrupted (powering off abnormally) that I'll get a bunch of filesystem errors in dmesg. I can fix it by booting with the "noimage" cheat code, like "knoppix64 2 noimage" and then run "fsck.ext2 /mnt-system/KNOPPIX/knoppix-data.img" and then "sudo reboot".
It'd be really nice if there were an automatic check of the ext2 image when knoppix boots. It would also let you know if errors have crept into your filesystem since knoppix still works but you see weird messages like "unable to write /etc/fstab".
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
HPE 727263-003 BL460c G9 Raid BBWC Smartstorage Battery
$24.99
Dell R630 8SFF 2.6Ghz 20-Core 256GB H330 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$576.04
Dell R630 8SFF 2.1Ghz 36-Core 192GB H730 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$655.04
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$86.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 04Y5H1 High Profile
$14.99
Lenovo 930-16i PCIe SAS RAID Controller FRU P/N: 01KN508 Tested Working
$149.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99