I've been looking for a way to get Knoppix to work on my Fujitsu Lifebook P-2040 which uses a Transmeta Crusoe processor. The boot process would freeze when loading the ALI3X* driver. I found a workaround is to disable this by putting the IDE devices into ATA66 mode.
Issuing 'knoppix ide0=ata66 ide1=ata66' at start will allow Knoppix to work properly on a Fujitsu Lifebook and presumably other platforms that use the Crusoe processor.
Kudos go to martin dempsey for the answer:
http://thcnet.net/pipermail/lvlug/20...er/008230.html
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
Dell PowerEdge R730 Server 2x E5-2620v3 2.40Ghz 12-Core 192GB H730
$645.20
HP ProLiant DL360 G9 Server 2x E5-2660v3 2.60Ghz 20-Core 96GB P440ar
$304.35
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
HYVE ZEUS V1 1U BAREBONE SERVER 2X10CORE E5-2680V2 2.8GHz 16GB RAM RISER NO RAIL
$180.00
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
Dell Poweredge R640 8 SFF Server No HDDs/ CPUs/ RAMs/ Cards/Fan/PSU
$419.99