Hmm I found that code in another thread:
It seems it could be my answer but where to I ave to add it??Code:none /proc/bus/usb usbdevfs defaults 0 0
Is it in the same boot file that the one, where you have to add the partition?
Hello,
I have a Canon Powershot S30, I added it in the place where you can add the camera (don't remember the exact name).
But when I plug my Camera to the Laptop, nothing happens. And if I go back to the place where I added the Camera, and I click on the Test button...
The test fails...
Is there something special to do to connect a camera? Is there something to look at the USB config (if yes, where)? and is there a device to mount (like for the hard-drive)?
Any help will be welcome. I really hope to find a way to solve this problem!
Thxs
Coume
Hmm I found that code in another thread:
It seems it could be my answer but where to I ave to add it??Code:none /proc/bus/usb usbdevfs defaults 0 0
Is it in the same boot file that the one, where you have to add the partition?
If by the boot file you mean the file /etc/fstab the answer is yes this is the file you would put the line into.Originally Posted by Coume
Great!
Thank you!
Does it mean that an USB-key memory or hard-drive will be detected immediately too?
But in this code, why there is "none" that was the thing schocking me in the code... Does it have a meaning?
Thank You!!
Ludo
Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig UPOE Network Switch, no module
$349.97
Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig UPOE Network Switch + NM-8X Module
$649.97
Cisco Catalyst WS-C2960X-24PD-L GigE PoE 370W, 2 x 10G SFP+, LAN Base w/C2960X-S
$114.00
Cisco STACK-T4-3M Stacking Cable New Sealed
$149.00
Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W+ C3850-NM-4-1G Mod
$89.00
Cisco WIC-1AM-V2 1-Port Analog V.92 Modem WAN Interface Card - 1 Year Warranty
$5.95
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
Cisco C3850-NM-4-10G 4 Port Network Exp.Module for 3850
$144.32
Cisco Catalyst WS-C2960X-24PD-L GigE PoE 370W, 2 x 10G SFP+, LAN Base H22
$94.00
Cisco WS-C2960X-48FPD-L 48 V07 POE+ GE+2 10G SFP+, LAN BASE 740W H32
$74.95