Hmm. If no one chimes in here, you may want to try posting over in the qtparted forum.
I'm trying to free up enough disk space to knx=hdinstall on a 30G drive by resizing my FAT32 primary using Qtparted.
When I start qtpartted from the root shell:
Error: \BOOTLOG.PRV is 63k, but it has 5 clusters (80k).
And when I try a resize operation Qtparted reports:
An error happen during ped_file_system_open_call
and reloads the disk info.
BTW - how to capture command output for display in a post - retyping is a drag.
Hmm. If no one chimes in here, you may want to try posting over in the qtparted forum.
--Same thing happened to me on an old Toshiba laptop with a 4-gig drive. Since I'm selling the laptop anyway I just flamed the drive clean and started over.
--I think the Mandrake install disks let you resize, but haven't done it myself. (I use Partition Magic.)
http://www.mandrakelinux.com/en/ftp.php3
Originally Posted by sminotti
You mean like this:BTW - how to capture command output for display in a post - retyping is a drag.
knoppix@molehole:~$ echo hello
hello
knoppix@molehole:~$
Easy peasy! Put the cursor on the console, hold the left mouse button down to highlight, get focus on where you want to paste the text (right click) and just hit the middle mouse button (or left and right together on a 2 button mouse).
Thanks for the tip, Fingers. (I get it - A Fingertip! Anyway no replies on the qtparted forum yet. Here's some ouput from mount and parted (found on the STD distro)
mount
/dev/root on / type ext2 (rw)
/dev/cdrom on /cdrom type iso9660 (ro)
/dev/cloop on /KNOPPIX type iso9660 (ro)
/dev/shm on /ramdisk type tmpfs (rw,size=97356k)
usb on /proc/bus/usb type usbdevfs (rw,devmode=0666)
/dev/hdd1 on /mnt/hdd1 type vfat (ro,nosuid,nodev,umask=000,uid=1000,gid=1000)
automount(pid284) on /mnt/auto type autofs (rw,fd=6,pgrp=284,minproto=2,maxproto=4)
parted -i
Using /dev/hdd
Information: The operating system thinks the geometry on /dev/hdd is
3877/240/63. Therefore, cylinder 1024 ends at 7559.999M.
(parted) print
Disk geometry for /dev/hdd: 0.000-28629.562 megabytes
Disk label type: msdos
Minor Start End Type Filesystem Flags
1 0.031 25832.460 primary fat32 boot, lba
(parted)
From cfdisk Print, table
Partition Table for /dev/hdd
---Starting--- ----Ending---- Start Number of
# Flags Head Sect Cyl ID Head Sect Cyl Sector Sectors
-- ----- ---- ---- ---- ---- ---- ---- ---- -------- ---------
1 0x80 1 1 0 0x0C 239 63 1023 63 52904817
2 0x00 0 0 0 0x00 0 0 0 0 0
3 0x00 0 0 0 0x00 0 0 0 0 0
4 0x00 0 0 0 0x00 0 0 0 0 0
Cfdisk again, Print, sector
First Last
# Type Sector Sector Offset Length Filesystem Type (ID) Flags
-- ------- -------- --------- ------ --------- ---------------------- ---------
1 Primary 0 52904879 63 52904880 Win95 FAT32 (LBA) (0C) Boot (80)
Pri/Log 52904880 58620239 0 5715360 Free Space None (00)
Perhaps somebody can see somethin in all this.. Thanks
Cisco GLC-FE-100FX-RGD 100BASE-FX SFP Transceiver Module
$17.99
Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module
$24.99
Cisco Meraki MA-SFP-10GB-SR 10G SFP+ SR 850nm 300m LC MMF
$29.99
CISCO SFP GLC-GE-100FX 10-2019-02 100Base-FX SFP GBIC Transceiver Module 1pcs
$52.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
10Gbps 10GB SFP+SR transceiver for UniFi Switch 16 XG 16port Ubiquiti US-16-XG
$10.99
10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module
$85.00
New HP HPE Aruba J9150D 10G SFP+ LC SR 850nm 300m MMF XCVR Transceiver Module
$49.99