-
starting linuxrc and init
Hi Folks,
I try to build my own Knoppix based CD. For this I try to build my own initrd.
Ok my first problem was that the kernel didn't start my linuxrc. I found the reason. If the
root-Filesystem (root= parameter from syslinux) is the same as ram0 (in my case the initrd-fs) the kernel didn't execute linuxrc and step over to execute init.
(this is in do_mounts.c in function "void prepare_namespace(void)" - Linux 2.4.20)
Ok.. I that this is no problem. I will pass no root boot option (or a wrong) and I'll set this in linuxrc but... in this case the kernel stops because he couldn't load modules and other messages (depending with root-option you give)
My question: Do you know how knoppix handle this issue?
Thanks,
Thomas
-
Senior Member
registered user
You are probally best to start off by remastering before trying to build one from scratch.
see http://www.knoppix.net/docs/index.ph...masteringHowto
also you may be interested to see how to replace the kernel :
http://www.knoppix.net/docs/index.ph...tomKernelHowto
-
Hi eadz,
thx for posting a reply. I read the both Webpages, but they didn't cover my questions.
It would be cool if someone has an idea how to solve this prob.
Thanks,
Thomas
-
Senior Member
registered user
Re: starting linuxrc and init
Originally Posted by
thomas
Hi Folks,
I try to build my own Knoppix based CD. For this I try to build my own initrd.
Ok my first problem was that the kernel didn't start my linuxrc. I found the reason. If the
root-Filesystem (root= parameter from syslinux) is the same as ram0 (in my case the initrd-fs) the kernel didn't execute linuxrc and step over to execute init.
(this is in do_mounts.c in function "void prepare_namespace(void)" - Linux 2.4.20)
Ok.. I that this is no problem. I will pass no root boot option (or a wrong) and I'll set this in linuxrc but... in this case the kernel stops because he couldn't load modules and other messages (depending with root-option you give)
Okay, i'll give it a shot. If i understand correctly, you are trying to boot your initrd filesystem with the root= option. However, to load a filesystem into ram to boot with (as root), you need the initrd= kerneloption instead. Then, linuxrc should be executed like usual.
Hope this helps,
Similar Threads
-
Replies: 0
Last Post: 09-01-2004, 06:20 PM
-
By ManiOne in forum General Support
Replies: 1
Last Post: 08-11-2004, 11:36 AM
-
By bongski55 in forum The Lounge
Replies: 2
Last Post: 05-11-2004, 11:56 AM
-
By darthczyz in forum Customising & Remastering
Replies: 0
Last Post: 04-08-2004, 01:15 PM
-
By berdy in forum General Support
Replies: 12
Last Post: 08-18-2003, 06:25 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$37.11
Juniper EX4300-48P 48 Port PoE Gigabit Network Switch - COMES WITH DUAL POWER
$325.00
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$168.00
Juniper EX3300-48P 48-Port 10/100/1000BASE-T (48 PoE+ ports) with 4 SFP+
$74.00
JUNIPER QFX5100-48S-AFO 48-Port SFP/SFP+10GbE 6x40GBE QSFP+ DUAL AC PS
$625.00
Juniper EX4200-48PX 48-PORT 10/100/1000BASET PoE Ethernet Switch
$38.39
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$59.95
Juniper SRX320 8-Port Security Services Gateway Appliance w/ Rack Ears
$99.97
Juniper Networks EX3300 EX3300-48P PoE+ 48-Port 4x SFP Gigabyte Ethernet Switch
$59.99
Juniper EX 4300 EX4300-48P Gigabit Network Switch JunOS 21.4R3-S7 48 Port PoE
$249.00